Recent content by hooyah

  1. hooyah

    low fuel supply pressure 2015 Evinrude G2 300HP

    I shall, later on today after I retrieve the malfunction code.
  2. hooyah

    low fuel supply pressure 2015 Evinrude G2 300HP

    I got this error code, (low fuel vent vapor pressure) can't remember the number right now, but sent the engine into Safe Mode, then died out. Same thing happened on the exact same day last year. Got towed home each time but thankfully by good Samaritans who were just passing by. I figured out...
  3. hooyah

    timing my 125's

    https://docs.google.com/file/d/0B21zyr3EUltNSkFESThlRXd0QndkMjlQSFJMeE9KQkctdWFj/editFrank, my STBD 125 quit on me when I broke a plastic timing nut and it's never run right since. I replaced the nut, both sides, and I was static timing the engine. I set it to the 28 deg mark, but when I timed...
  4. hooyah

    outboard to inboard conversion

    I have an 89 trophy 23' cuddy cabin walk around and someone posed the prospect of converting to a diesel inboard. Anyone have an idea how much that retro fit would run in materials and effort, not including the engine and stern drive?
  5. hooyah

    Fuel recirc issue

    I recently rebuilt the twin engines 125 hp Forces. I keep blowing out gaskets on the side covers including the 3 and 4th cylinder. I did check the check valves on the fuel recirc systems when I rebuilt the engines and they were ok. Could it be a torque issue? The covers aren't tight enough...
  6. hooyah

    Replacing the internal crankshaft seal (1of 3)

    Re: Replacing the internal crankshaft seal (1of 3) Here's what I'm talking about.
  7. hooyah

    Replacing the internal crankshaft seal (1of 3)

    I took apart my port (Force 125) engine and discovered a broken crank seal. I ordered a new one and plan on putting it on. Does anyone have any advice on how to proceed without breaking it while trying to install it?
  8. hooyah

    Replacing the piston on a 125 HP

    What's the best advice for replacing the piston. I ordered the standard piston and pin. I don't own the piston tool set. Would it be best to take it to the boat repair shop or a local machine shop to have the piston pin removed from the old one and the new one installed?
See more
Top