First time I hook a Tilapia, I don't know how is called this in english, not common to get one of this with a lure, and yesterday I fished 2 of them, not very fun the rod just felt heavy, no fight at all.
Good experience anyways.
Not a lot of updates just cleaned up the carbs and fired it up, it sounds good at idle will never know until going back to the lake if it revs ups, but I remembered in other thread ot maybe in this one before the rebuild of the motor jerry told me to spray starter fluid to see if it was leaking...
The boat is 15' long, I'm unsure of the lenght of the trip but we were running average 25-26 mph, that means that over all it was 1.3 hours more or less. According to what I have read the rle of thumb is that my 50 hp will burn 5 gph. It should had been 6.5 but we burned 10. There are things to...
Hi,
what kind of tachometer I need for my outboard? 1978 Mercury 500 Thunderbolt 50HP S/N
4967035, after some tweaks I think it is running good but even being a small engine it is a thirsty one, it consumes too much gas to what I believe should be doing, we usually go WOT I want to change that...
solved with new cables, definetely the not shifting was due to the very damaged cables I had, I got the 13' same as the ones it had before, I think they are too long but I didn't wanted to risk going for the shorter ones.
Thanks, altough I did find the Part number in Crowleymarine.com, and there's one availble in ebay so I think I will go for that one, it is a lot of work to get that is not worth risking to make one myself. Would that seal cause the issues I'm having, still will make the test with the cowling...
I was reading some old posts regarding the exhaust leak, some items they mentioned to check is the idle exhaust boot #5 that one is good, I changed it recently prior to this work I will check that I installed it correctly as this is a hard thing to put, the one thing that I know for sure is bad...
Last time I did run without the cowling cover and I noticed it ran better with out it, I don't know if that is better air flow but of course it is intended to run with the cover so I put it back again.
Will take a look to the wires you mention in the stator and trigger.
Forgot to mention when I was in the rebuild process I took a look to the reeds and all seemed to be closing except for one, you could see a tiny light through, but I believe its in the acceptable range.
I had one of those filters before but took it out, I will put a new one now. I have another lake trip this weekend so I need to do this cleaning during this week to have the chance to go there and test. I'll post results.
Hi Jiggz we did check on the primer bulb that was a common issue in other boat so now almost every time something fails that is one of the first things we check, I believe it is not the issue it does not collapses and stays firm all the time, if you try to press it when its starting to die it...
