Recent content by lymanboat15

  1. L

    dixie plywood boat

    IS there any information on a 1957 Dixie 15 ft plywood runabout .The boat was made in newton n.c. thanks Alex
  2. L

    57 big twin blows 30 amp fuse

    Well I have another motor 1957 35 bigtwin electric start when I hook up the battery the 30 amp fuse in the box blows I have disconnected the amp gauge and as soon as I touch it to the start switch the fuse blows .Can there be a short in the amp meter the boat has been sitting since 94 the...
  3. L

    starter solenoid for 1958 35 bigtwin

    Re: starter solenoid for 1958 35 bigtwin The mercury switch was a little out of adjustment. Tested the solenoid it was good it is from a mercury newer model. mercury switch is also new. The one red wire on the cutout switch goes to the magneto under flywheel the other red wire goes to...
  4. L

    starter solenoid for 1958 35 bigtwin

    My motor has a electric start system added it was original manual start.The starter workes fine. can I use a solenoid from what years evinrude. I will just use a key start switch on the dash .
  5. L

    58 evinrude fuel system

    Re: 58 evinrude fuel system This is a prop off 1959 evin rude electric shift the holes don't line up is it because it is from electric shift please se attacheed pictures thanks ALEX
  6. L

    prop interchange for 35 1958 bigtwin

    What year props are interchangable for a 1958 35 bigtwin will a 1964 work engine came with no prop thanks Alex
  7. L

    removing rust from 6 gallon tank 1961

    Does anyone know if it is possable to remove the rust in the bottom of a six gallon gas tank 1962 .The sides and bottom are solid but it has been sitting for some time.I removed the gauge and fuel pickup they are ok just some cleaning.Ther is a little gas mixture in the tank so the tank is...
  8. L

    mercury switch location 58 big twin

    The wire to the mercury switch on the cutoff switch on oy 58 is just hanging either someone cut the mercury switch off or it got disconected where is the mercury switch located on the engine .the wire i'am talking about is the black wire located on the side of the cutoff switch.i have traced...
  9. L

    58 evinrude fuel system

    Re: 58 evinrude fuel system carb that is on engine
  10. L

    58 evinrude fuel system

    Re: 58 evinrude fuel system
  11. L

    58 evinrude fuel system

    Re: 58 evinrude fuel system Pictures of fuel lines also line that is pluged from carb
  12. L

    58 evinrude fuel system

    HI This is my first time on the forum I hope I get it right. I have a 58 35 hp big twin someone had a fuel pump system on the engine.I want to run the original two line system.There is a small line coming out from the front of the block behind the carb that is blocked off also a small ruber...
Top