Bought a 48hp johnson non running and I am trying to get it running. The motor will not spin over fast enough when the plugs are in to start, but with the plugs out it will crank over great. New battery ends, compression is good and the motor is in pretty nice shape over all. Any ideas...
Hi,
I recently acquired a yamaha 90 outboard. I cant make sense of the diagram and asking around has gotten many different responses. it is a 2 stroke oil injection 90AETO 6H1 L 450183
Hi my shift interupt switch on my 1991 mercruiser 3.0 went bad and I bought the new part. I'm not sure it's the correct part even though the marine store told me it was. The wire ends are different at the very least
I have a 1991 mercruiser i/o with a 3.0 inline 4 cyl. someone before me bypassed the neutral safety switch and im trying to figure out how to fix it. Im not totally sure where on the engine its located.
I picked up a 21' cuddy cabin with a 60 gallon fuel tank for the 225hp evinrude. There is some issues with the fuel tank and I was wondering the best way to fix them
I picked up this boat today, its a 1976 Donzi Magnum tunnel hull. The previous owner ripped out most of the rotten stuff, leaving me with the task of putting it back together. Im not entirely sure where to start or how to start, so all of your input will be welcome.
Hey guys. I have a 14' aluminium boat with a 30hp tiller on the back longshaft. Im looking to bring it up to the upper delaware river and am trying to figure out where I can use it without having to worry about the water depth. Any input would be appreciated! Im looking to camp overnight this...
Ive got a 1998 mercury 2 stroke direct injection 30 horse on the back of my 15' lund aluminum boat. Its a heavy duty boat, weighs about 400 lbs, has floors and swivel seats etc. What prop can I use for maximum speed? I can get it up to about 25-26 mph with one person.
Is it worth it for...
Hey Guys,
I've got a 1988 evinrude 9.9 that wont start. I had the pull cord snap on me last week and I put it all back together and used the motor. Handle snapped off because I didnt attach it right and I took it all apart once more. Now the motor will not start whereas previously it would start...
I have a 1999 Mercury 30hp direct injection outboard. I ran it thursday and had a few issues with starting but i assumed it was a stripped fuel line fitting to the tank connection this was after running for a while and then killing it to fish. I stuck the hose into the tank directly it started...
I have a 25' sailboat I will be mooring on the Delaware River. Theres a 6-7' difference in tides and the current runs about 2-3 knots maximum Ill be mooring it in I would guess 20'-25' of water at high tide (Possible 15-25' Im not entirely positive) I know the weight of the trailer and boat is...
I changed the water pump and am now trying to reconnect the lower unit to the rest of the motor. I cannot get the linkage lined up right and i keep having issues. When i bolt it all together the shifter is stuck in forward and i cannot move it at all. Any help?
Im looking into buying a 1969 16' starcraft i got emailed about. it has a 50hp outboard 1973 evinrude which he says runs great and will prove when i look at it The boat leaks so I'm assuming rotten floor maybe transom he said its from the seam but i know a guy who tig welds for cheap.The seats...
Well i posted before about replacing the families tow vehicle thats been put on hold. yesterday afternoon my brother was driving to delaware on route 295s and one way or another lost control in the rain. hit a guardrail doing at least 65mph. while it dosent look terribly bad the airbags deployed...
I posted a thread a few weeks ago about mid sized SUVS and i think I've got to narrowed down to two. the s-10 blazer and cherokee. I'm not sure which is the better overall SUV though. i would be doing some light offroading most likely nothing a stock suv couldn't handle. and for towing a light...
