The local shop here wants $1,400. The other local shop will not do a cover unless they put snaps on the boat. Said they do not do the strap type covers.
Guess I will keep looking.
I have a 2018 Tracker Pro Guide combo boat. I ordered a cover for it that was advertised by a well-known business, and they claimed it would fit my boat. It was made in China and did not fit the boat. It was not even close to fitting the boat. It cost me a little over $30 to send it back. I...
The post turns slightly on my boat but pushing the button does not seem to unlock the post so it will come out. Hope someone has found a fix for this problem.
It is a real pain in the rear to put them back I just bought a boat that the owner did that on. I was hours trying to get the remaining parts of the rivet's out so I could put new ones in.
I mounted the transducer close to the drain hole and off the raised part of the floor and now it works fine. The problem was I mounted the fish finder on the dash behind windshield and had to drill the hole for the cable to reach the fish finder. I would have wire power under the dash but did...
Yes, I think it was a 1 1/4 hole I had to drill for it to go thru the top of the dash behind my windshield. I have tried pushing it thru the hole in back where control cables come out but have not found a clear path for it to go thru.
I called it a fuse but not really sure what it is. On my Hummingbird 678 fish finder about 3 inches from the connector to the fish finder there is a round thing that is about the size of a silver dollar but thicker. I was going to run the cable the way you said but could not get this part to go...
I have a ProCraft 170 fish and ski boat. I glued the transducer to the raised area in front of the drain plug and it does not seem to work there. Not sure if there is a open space between that and the bottom of the boat or what causes the problem. I have moved it to the area right in front of...
