I installed a 1983 Force 85 HP on a 1974 Starcraft that originally came with a 1974 65 HP Johnson. Both motors had a 2-wire connection to the tach/ground. After installing the Force, I hooked up the purple tach wire (and ground) to the two connections for the Starcraft tac/ground. It works...
I don't have the specific manual for my 1983 Force 85 HP but would like to replace my impeller today. Can anyone send me step-by-step instructions along with any advice as to any special precautions or tips that may not be in the manual? I've read some related posts here that indicate there was...
My overheat warning went off after a few minutes of idling in the water. The motor sat for a few years and I've read that the thermostat, impeller and water pump are all prime suspects. What logical order should I follow to problem-solve? Do I need special tools to test the thermostat?
I switched out a motor, controls and ignition switch but I'm not sure about the starter relay connection to the ignition switch, and now my starter spins but won't engage. At first I mistakenly connected the black wire from the ignition harness to the ignition switch terminal labelled "I"...
I'm stumped now that I've switched out the ignition switch, controls and motor. Before disconnecting the ignition switch I labelled each switch contact to the respective wire colors beforehand. Now that I've installed the switch/motor on another boat, the circuit breaker trips as soon as I turn...
I switched controls and ignition and I'm not sure how to wire my overheat buzzer. There are 2 wires connecting the buzzer-one is orange and I believe it connects to the sensor on the motor, but I'm not sure where to connect the other short black wire that extends from the buzzer. The buzzer is...
