Pmt133's latest activity

  • P
    Pmt133 replied to the thread MC-1 Drive Dog failure?.
    It's 50/50 if I can get an 8mm on a hose clamp or not. The drive ones may be okay, the ones at work don't fit all that well and usually...
  • P
    Pmt133 reacted to ratdude747's post in the thread MC-1 Drive Dog failure? with Like Like.
    5/16 and 8mm are virtually the same size. Especially in a low-torque situation like these hose clamps. In any case, nothing locally...
  • P
    Pmt133 replied to the thread MC-1 Drive Dog failure?.
    It should be 5/16.
  • P
    Pmt133 reacted to ratdude747's post in the thread MC-1 Drive Dog failure? with Like Like.
    Called it at 15 minutes... seems to be sealed well. I'll fill it with oil and grease the u joints before it goes on. Attempted to pop...
  • P
    Pmt133 replied to the thread My 84 4winns horizon 195 project..
    Rolled two coats on the bottom. The hull is obviously too damaged to strip back to gelcoat... as much as I'd like to anyway, the blue...
    • 20250729_185608(1).jpg
    • 20250729_150201(1).jpg
  • P
    Pmt133 reacted to Scott Danforth's post in the thread 2014 GMC Sierra AC with Like Like.
    Closing this out. Amazon brought new hoses and I swapped my service connections Checked pressures against the chart Air out the...
  • P
    Pmt133 replied to the thread Engine, Carb or Prop? need suggestions or ideas please..
    I just wanted to add, our boats are similar in size and having the same 090m block... while I can't verify what exactly is in your mill...
  • P
    Pmt133 replied to the thread How do you trim?.
    Thats like me walking into work after the "A team" worked a weekend. Never ceases to amaze me the different ways someone can find to...
  • P
    Pmt133 reacted to airshot's post in the thread How do you trim? with Like Like.
    Most boat owners are not using their boats every day, so it becomes a new experience every time they use it.
  • P
    Pmt133 replied to the thread How do you trim?.
    I think the thought of over trimming scares people too. I think there is a pretty large sum of boaters out there that just tilt down and...
  • P
    Pmt133 reacted to tphoyt's post in the thread How do you trim? with Like Like.
    I think a lot people over think some things and make them more complicated than they need to be.
  • P
    Pmt133 replied to the thread How do you trim?.
    Seems everyone is mor or less confirming that how my friends boats behave is... odd. So my exact process... I have the older MR transom...
  • P
    Pmt133 reacted to ratdude747's post in the thread How do you trim? with Like Like.
    Depends on the boat. I'm lucky... my Starcraft Montego (with a 302 mercruiser and a whale tail on the outdrive) doesn't need trimmed...
  • P
    Pmt133 reacted to Chris1956's post in the thread How do you trim? with Like Like.
    Some boats will ventilate if you trim them at idle and then accelerate. This is especially true for boats where their outboard motors...
  • P
    Pmt133 reacted to jlh3rd's post in the thread How do you trim? with Like Like.
    pontoon boat: I trim for max speed/rpm/ neutral wheel feel at whatever rpm I'm running.
Show older items
Top