Recent content by Ramdave

  1. R

    Accessory switch wires

    Now that makes sense, you just run the new wire from the switch to your accessory.
  2. R

    Accessory switch wires

    So there should be a single orange wire under the dash not connected to anything.....yet?
  3. R

    Accessory switch wires

    Hello All, I have a 2006 crestliner fish hawk 1750. There is an accessory switch on the switch panel and wanted to connect my radio to it because of parasitic draw issues, that way I can just turn off the switch and cut power to the radio. For the life of me I cant find the feed wires for the...
  4. R

    Mercury Oil drain plug size

    I saw that page, the 1.25x1.25x2.25 measurements are for the size of the box the plug comes in. Thank you for taking the time though, and yes it's for the engine oil drain. I attached a pic of the system I'm looking at, this one is 18x1.5 and too large. When everything is installed, you remove...
  5. R

    Mercury Oil drain plug size

    I understand thread and pitch, my boat is in storage and can't get at it to check the plug size till spring. This is the drain plug for the engine oil. Need the thread and pitch #'s to buy the EZ drain system, they have like 12 different sizes.
  6. R

    Mercury Oil drain plug size

    I have a 2006 Merc 4 stroke EFI. I want to install a quick oil drain system, they go by plug size not by engine. My plug is part # 8288181 according to mercury but they could not tell me the plug size. I thought I saw somewhere it is 14x1.5mm but I'm not sure. If anyone knows the size please let...
  7. R

    Mercury 2003 115 4-strokeEFI

    I would check the fuses under the cover
  8. R

    Bearing Buddies

    Thank you both for the input and no I don't want to be that guy. What kind of covers do you put on the hubs with the EZ lube axle and is EZ lube a brand name?
  9. R

    Bearing Buddies

    Just bought a used 2006 Crestliner with 115 Merc fourstroke and a Crestliner trailer (whoever makes those) Hubs have bearing Buddies, so I thought I would pull the bras and see what was going on. The zerk was laying in the bottom of the BB and I couldn't screw it back in, I knocked off the BB...
  10. R

    Converting bunk trailer to rollers?

    I'm just the opposite, had a roller and loved it, drive up every time and boat would center itself, leave it in gear to keep it up on the bow roller and hook the strap. I now have a bunk trailer and its harder to get the boat off and harder to get on centered when putting it on. Maybe I'll get...
  11. R

    Switches

    Great to know, thank you. now have to figure out what I want to wire to it.
  12. R

    Switches

    I'm probably doing this wrong, and in the wrong place, but, I just bought a 2006 crestliner fish hawk 1750 walk thru and on the switch panel there is a switch for accessory what is the switch for? I thought maybe it was for the cigarette lighter socket but it stays at 12 volts with the switch...
See more
Top