Recent content by Raschoony

  1. R

    90 Searay 180

    Boat has sat for a few years... I know the floor is rotted on a few areas around the gas tank access, and also all of the seat cushion back have disintegrated. I have decided to rip up the floor and see what kind of fun i can get into. I will post pics of what I come across.
  2. R

    1990 Evinrude- is this a water leak or normal?

    http://www.yourfilelink.com/get.php?fid=945827 theres a video hope it works, it shows on the forward area above the lower unit water is coming out. I don't remember water coming out from the spot, is it bad or is it normal? I havent ran it in a few months and can't remember the "norm"
  3. R

    '90 Evinrude 150 lower unit oil

    I've searched online and all oil that's bad is said to be milky... What about an Olive color and stinks....?
  4. R

    1990 Evinrude 150 starts itself

    Yup... it starts itself... here's the lowdown... I finally had the time to start up the boat after the winter. I knew going into it the motor would fight for this first of the year startup. I had several failed attempts and starting... would just crank and crank... I was worried of getting the...
  5. R

    Spider Cracks and gouges

    Re: Spider Cracks and gouges First attack at gelcoat also.. this is where i realized white is way off.... my coloring agents should be here Friday.. These started off as cracks..... I dremeled them deeper and at a "v"...
  6. R

    Spider Cracks and gouges

    Re: Spider Cracks and gouges was
  7. R

    Spider Cracks and gouges

    Re: Spider Cracks and gouges first attempt at fiberglassing..: Here's the depth: I'm thinking I need more?
  8. R

    Vinyl Trim Boards

    Re: Vinyl Trim Boards Ok, its still raining outside but dashed to the boat and jumped under the cover... (which I now realize is not protecting ANY water from coming in...) and got some pics... Now on what redneck joe posted on the screw covers... I was hoping to do it how the old ones were...
  9. R

    Vinyl Trim Boards

    Re: Vinyl Trim Boards Just need to trim some spots to align a bit better... then I'm going to go get the oil based paint... here's it someone assembled to see how I was doing...
  10. R

    Vinyl Trim Boards

    Re: Vinyl Trim Boards Well I cut the boards... Here's some old board vs new boards...
  11. R

    Vinyl Trim Boards

    Re: Vinyl Trim Boards
  12. R

    Vinyl Trim Boards

    I've also included redoing some of the vinyl trim pieces that weren't holding up to the sides while I redo some gouges you guys are helping me with.... I removed the staples and removed the vinyl.... my question is what kind of wood was used... it seemed to have a thin layer.. almost like...
  13. R

    Spider Cracks and gouges

    Re: Spider Cracks and gouges Found another pic not sure why it didn't get posted Schoony
  14. R

    Spider Cracks and gouges

    Re: Spider Cracks and gouges Last but not least... The old owner made some repairs.. Schoony
  15. R

    Spider Cracks and gouges

    Re: Spider Cracks and gouges Also, Where the OB is housed.. ?transom? (school me on verbage please).. theres a bucket... both ends have cracks Schoony *the other side pic wont load.. but both cracks are in the corners LH and RH side aft section of the bucket..
See more
Top