Current visitors

Home
Members

Scott Danforth's latest activity

Scott Danforth replied to the thread Cross country trailering advice/tips.

in addition to the right tools, a good jack and a spare hub. Have a second spare tire. both times hauling a boat from Wisconsin to...

Apr 9, 2025
Scott Danforth reacted to BWR1953's post in the thread Scientist claim to have brought back Dire wolf with Like.

There have been 4 movies telling us why starting down this road isn't a good idea. :sneaky:

Apr 9, 2025
Scott Danforth replied to the thread Need some help just bought 96 chris craft.

the fact that there are redundant gauges added to the dash says something is shoddy in the boats maintenance past. The carb has been...

Apr 9, 2025
Scott Danforth replied to the thread Testing Gas Flow on 82' Wellcraft Sterndrive.

What was dwell set to?

Apr 8, 2025
Scott Danforth reacted to dubs283's post in the thread 4.3 efi tbi throttle question with Like.

52-55 mph in a 21.5 ft boat powered by a 4.3 V6 seems a bit high to me. My experience with Grady White boats is they are built a bit on...

Apr 8, 2025
Scott Danforth replied to the thread no oil after cylinder head recondition.

BBC Gen VI are all rollers. (1996-2000) BBC Gen V are sometimes rollers (1991-1995) BBC Mark 4 are flat tappet (1965-1990) SBC vortec...

Apr 8, 2025
Scott Danforth replied to the thread no oil after cylinder head recondition.

Not with a Gen VI roller

Apr 8, 2025
Scott Danforth replied to the thread Help with aligning dual console windshield..

If you didn't replace the floor and stringers, you have to now If you did, you can get longer windshield struts. Both of your consoles...

Apr 7, 2025
Scott Danforth replied to the thread Bulkhead Stress Crack Repair.

post a pic looking down the side of the boat. sometimes when foam gets saturated with water and freezes, it will push the hull outward...

Apr 7, 2025
Scott Danforth replied to the thread 4.3 efi tbi throttle question.

Did you do a compression test? Post the numbers Did you test fuel pressure? Post the numbers Did you check the fuel filter for water?

Apr 7, 2025
Scott Danforth replied to the thread Piston Rings don´t fit, too little clearance, sits too tight.

Did you mix the skirts to make sure they did not collapse? Did you use a bore gauge to make sure the birds are not tapered? Never been...

Apr 6, 2025
Scott Danforth replied to the thread Piston Rings don´t fit, too little clearance, sits too tight.

If you bought pistons from a shop, have them supply the rings

Apr 6, 2025
Scott Danforth replied to the thread Carb rebuild question.

There are only two carb kits for a 2300 marine. They differ by the base gasket. There is either a 350 CFM or 500 CFM carb Your 5.0...

Apr 6, 2025
Scott Danforth replied to the thread Need some help just bought 96 chris craft.

Ford hasn't supported the marine industry since 1996. Most of the marine only parts quit being made back then. By 2005 or so the parts...

Apr 6, 2025
Scott Danforth replied to the thread Piston Rings don´t fit, too little clearance, sits too tight.

Volvo bought the long block from GM. GM had a few different sources for the piston assembly. There could have been a change. Are...

Apr 6, 2025

Show older items

Home
Members

Top