I have a suzuki 9,9 TH (2008) with remote control and electric start that won't start. it won't even turn over. It does start manually when I turn the key and crank it with rope.Here is what I noticed and any help would be appreciated.
1.I have power to the unit, the power trim works on both...
~~I have a 2010 Larsen Senzav 206 with a 5.0 MPI, alpha 1.
The current prop came with boat which is an aluminum mercury prop in 19 pitch. I can't read the diameter. I would like to have a prop so I can plane a lower speeds when towing the kids for water skiing. At WOT it runs at 52- 55 mph GPS...
Hello
I am looking to buy a fuel line and primer bulb for my Suzuki DF115. I tried looking online to find out what size is supposed to be on there cause right now cause its an aftermarket and I am not sure if its the right size.
I check with Brownspoint and they couldn't tell me which size I...
Re: Fuel/water separtor problems with Suzuki DF115 and kicker, need advice.
Hi Greg
I now have acces to the tank and before I try to open the fuel pick up line. I have a few questions. Here is a picture of the line going into the tank. If I loosen this fitting that was attached to the hose...
Hello
I am looking to add a fuel separator and changing my fuel lines on both motors. There are no Suzuki dealers nearby my house so I have to order online.
Can somebody tell me what size fuel line I need on a 2004 Suzuki DF115 and a 2008 DF9.9TH?
what fuel water separator should I buy for...
Hello all
I installed a mercury Fuel/ water separator on my boat for my Suzuki DF 115 and my kicker TH 9.9.
The unit has 1 inlet and 2 outlets ( 1 for each motor) the first year I installed it worked fine.
Now when I run the kicker the main engine stalls when I start it back up and I have...
After 2 years with a prop suggested by the members on Iboats I am looking for a new as the 4 blade amita seems to have lost some punch. Here is the info about my boat and motor set up
Boat and Motor Info
1. Year, make and model of boat
2004, Lund fisherman 1800
2. Length, width and base...
I am posting for a friend.
the boat is a 2007 Supra SSV22 and they are having some issues to start the engine it's an indmar 320hp 5.7 L. there are no issue when we start it in the morning but if we go for a 30 minutes ride it will not start again. Then if we let it rest for 30-40 minutes it...
I have a Lund fisherman 18 ft boat with a 115 suzuki 4 stroke and 9.9 kicker. The boat is underpowered and stern heavy. I put on a 13.25 x 19 pitch Solas Amita 4 plate that to HSWII that I got cupped to help on my hole shot. It does help but if it gets rough I have a hard time controlling the...
Last year I started using a solas Amita 4 blade prop on my suzuki suzuki 115 DF. its a 19 pitch and I had to get it worked because I was overreving and its still over the 6000 rpm that I should run at WOT.
I noticed this year that I have these marks on my prop.
I am having cavitation...
I bought a DF 9.9 suzuki High thrust and now its not peeing very well. when I start it up it there is water flow then the water get boiling and it stops. If I increase the RPMS, the water starts flowing again.
I suspect the impeller is done.
Does anybody know where I can buy the manual for a...
I am looking at a Mach Prop, never heard of them before the number on the prop is F2492 and B500 / QQ012 on the outside. It is 14 x20, I am not sure if its right or left.
Thanks
I went out fishing on the weekend and the trim gauge is not working.
I checked the wires under the dash and everything looks ok.
Does anybody know what I can do or check?
the motor is a Suzuki DF115 and the boat is a Lund if it matters.
Thanks
Sturgeonx
HI bought a 9.9 high thrust and I noticed that the normal rabbit ears don't work on this motor as the water intake is not on the both sides of the motor but it is underneath the cavitation plate.
There is a screw in adapter but my dealer doesn't have, don't ask they don't know much.
Can I buy...
I am looking to buy a stainless Stilleto prop for my DF115 and need some help. I am not sure what pitch to get, as I have heard they have a high rake and I never bought a stainless prop before.
My current boat and motor is a Suzuki DF115 on a Lund fishermain 18.5 ft. with 9.9 kicker on the...
