Guys! Thank you for all the help. After chasing wires and connections, it ended up being where the blk/red connects to grn/black on engine side of harness. I should have checked continuity from blue connector engine side to the round connecter where the black/grn plug into the oil controller...
Thank you for the diagram! Forgive my naive questions here, black/red and black is the circuit i need to be checking that goes to The blue connector under the cowl? From that connection it should ground to the block somewhere, so just follow that and ensure that ground has good connection to...
I have checked continuity with the harness from the sensor on the remote tank (under console) to its connection under the cowl. No breaks in the line. Where is the sensor switch grounded? Should I check to see that the sensor itself is working and how do I perform that test? The sensor on the...
Trim indicator does work. I have pulled the sensor and moved up and down with no change on the gauge. The gauge was just rebuilt and to my knowledge is working correctly. Rpm’s are shown and tilt indicator seems to be functional
New to the forum so thank you in advance. I have an issue with the oil injection not sending oil to main tank on engine. Emergency switch operates and fills. When the key is turned on the tach shows green for about 8 seconds then immediately to yellow. This has never worked in the 4 years I’ve...
