Can anyone help me with removing a flywheel?

C

Calebc

Recruit
Joined
Jun 9, 2026
Messages
1
I’ve got a Johnson 25R70E and it’s not getting spark. I decided to remove the flywheel and check the points etc. but I cannot get the flywheel off. I’ve got a puller and tightened it as much as I can as well as used PB blaster, an impact, ball peen hammer, and even a blow torch. It’s not budging. Is there something I maybe missed? A secret nut or bolt I don’t know about? Any help would be greatly appreciated!
 

Attachments

  • IMG_7086.jpeg
    IMG_7086.jpeg
    2.3 MB · Views: 4
  • IMG_7085.jpeg
    IMG_7085.jpeg
    3 MB · Views: 4
C

Crosbyman

Admiral
Joined
Nov 5, 2006
Messages
6,147
soak soak soak .
if heat does not work try freezing... a keyboard dust spray can.....can cool things down fast A can from a dollar store will shoot pure spray held upside down and should help... spray the bolt only then heat up the FW fast to create a shock....try puller while heating the FW surroundings .

or a teflon spray may have better capillary effect to soak the threads .
 
S

saltchuckmatt

Captain
Joined
Jul 19, 2019
Messages
3,217
Steering wheel puller, impact or hand wrench very tight. One big smack gets mine Everytime. Big hammer.

Show picture of your puller.
 
You must log in or register to reply here.
Top