Search results

  1. L

    415DPX timing

    1998 volvo penta 8.2L 502 415DPX XBYDCE Need to know if this engine needs to be put in base timing mode using the shunt. Can't seem to find it in the book, but my diag software gives me a base timing mode option. Thanks.
  2. L

    Volvo Penta DPX Flush

    Where the heck are you supposed to hook up water to flush this darn thing? :/ DPX 415 XBYDCE I read that there is a hose on the starboard side of the engine with a blue cap and a water symbol...I'm here to tell you I just rebuilt that engine and handled every hose in the boat and I saw no such...
  3. L

    8.2L DPX 502ci Lifter Repair.

    I have this 8.2L 502 that I am swapping the block out on and I just noticed 5 of the hydraulic roller lifters are collapsed (cam, lifters, push-rods, and rockers are all being reused), but I don't recall them being collapsed when I took them out of the engine. No wear to speak of on roller...
  4. L

    Testing a newer engine on the ground

    Hey guys....I want to build a stand so I can run newer engines on the ground, just wondering if anyone has any design plans they have engineered and wouldn't mind sharing. For later model motors I have a little stand with just an ignition switch, oil gauge, and tach which I connect using...
  5. L

    8.2 DPX Block Replacement

    I've got an 8.2L DPX 415hp with a cracked block and the longblock price is way higher than I expected so I was hoping someone here had some alternative options. All the technical data is posted below. I was wondering if I could go with a 8.1L without running into huge headaches. I've found some...
  6. L

    5.0 MPI Alpha Timing

    Serial# OWO33688 MCM 5.0 MPI Alpha Just swapped out the block on this engine, need to make sure I am not missing anything concerning the timing. It's set to TDC and distributor was installed as outlined in the manual with the tang between the two marks. Is that all? No need for base timing...
  7. L

    Gear oil in outdrive

    Serial tag is missing on the outdrive so I'm not sure which manual to check to verify if this outdrive is really supposed to have gear oil in it, I thought with these older volvos it's all motor oil. Says 275 on the shift linkage plate. Engine serial says CU 61234 and printed on the valve covers...
  8. L

    PCM Rebuild & Info

    I'm about to rebuild an engine I have never rebuilt before and could use a little guidance. It's approximately an 1988... I didn't see any serial tags anywhere, but I did find the Ford block casting number on the starboard side under the block which reads " D9AE-6015-ED-1". Also the bolts to the...
  9. L

    Removing engine from a velvet drive

    All the serial tags are missing on both the engine (351) and the Velvet Drive so it's hard for me to give exact details...maybe I'll have to post some pictures. Anyways, all I need to do is pull the motor and replace the rear main seals, but I am wondering if this can be done without removing...
  10. L

    3.7L 180 Parts and Information

    Hey there. I have a new boat project, it's a 35' Searay with dual Merc 3.7L 180's Serial# B730773. I'm having a hard time finding a few parts locally, but I believe if I am not mistaken that the head, connecting rods, pistons, and flywheel are from the Ford 460. Is this true and does this mean I...
  11. L

    4.3GS PWTR Raw Water Flow Question

    99' 4.3GS PWTR On the muffs with the water turned up to higher pressure than I'd normally run it at and outdrive in the down position I see no to little water coming to the inlet side of the raw water pump which I have disconnected from the pump itself. So somewhere between the inlet of the...
  12. L

    New long block 4.3 GS PWTR

    Have a cracked block.... I'm gonna go ahead and assume that the heads are also cracked as they most always are so I'm looking for a long block. Here is all the info for the block: 98' vortec Volvo Penta 4.3 GS PWTR 4110186634 3868942 My question are what years can I look for to match this...
  13. L

    06' Seadoo GTI Clacking Noise while cranking

    I'm working on this 06' Seadoo GTI, it's throwing a p0344 code which I believe is a cam phase code. Anyone come across this specifically before? Here is a video so you can see it yourself. Thanks for any help.
  14. L

    Scan Tool for Shop

    Hey guys. So I was considering purchasing the Mercruiser Scan tool but I wanted to get some input on what I should or shouldn't buy. Basically I am tired of the hunt and poke method of trying to find problems and I'm ready to step into big boy pants. I need to get the best overall scanner that...
  15. L

    ultrasonic parts cleaner

    Hey Guys! I bought a Harbor Freight ultrasonic parts cleaner, specifically for carbs, but I need to find a bigger one without throwing thousands at it. I do enough of them I don't mind spending the $ but a few grand is just not practical for me at the moment. Does anyone have one they like and...
  16. L

    Only getting oil out of one push rod.

    I have this 5.7L I've been working on for a few months now, fresh rebuild, I've ran a few tanks of gas through it now but it wasn't performing like I thought it should and it developed what sounds like a valve tick. Also....ever since the rebuild I haven't been getting any oil pressure on the...
  17. L

    Upper steering swivel replacement

    Mercruiser 454 MAG Bravo Stern Serial# 0C658844 Hi friends. Helping a buddy fix his boat, it started binding up on the steering last trip out. Brought it over and noticed it had a lot of play in the outdrive so I pulled it thinking it was the gimbal...not the case. The bearing seems fine but...
  18. L

    plugs, wires, and oil filter 120hp

    Mercruiser 120 hp Serial# 6229797 Can someone tell me what the "autozone equivalent" plugs, wires, and oil filter? I don't believe GM ever used this lil' 153 block in any automotive application but I'd assume someone here would know which wires and filter I can use....I guess I can look up...
  19. L

    00' Seadoo GTX Limited Info Center Won't Turn Off

    Hey guys. I got this 00' Seadoo GTX with an always on info center, even with the dess key off the machine. Someone had run a switch coming off the batt initially to try to eliminate this problem, kind of like a perco switch, but all it did was cause it not to start. So I bypassed that switch so...
  20. L

    Basic Maintenance/Shop manual

    Hey guys. Just got a couple of new machines and want to make sure I am treating them correctly. I have alot more info for the Seadoo than I do the Honda. I don't want to cut any corners on these....jetpump oil replacement if applicable, oil, fuel filters...what's recommended?. The seadoo is...
Top