Search results

  1. T

    Trim Pump Wiring Help Please

    Well so I hooked up new solenoid still have same problem. Push down button (bottom of 3) pump runs. Push top or up button nothing no click nothing. Push top and middle buttons still nothing. Im tryin to find a thread that shows what terminals abcd to test and what I should have. I also...
  2. T

    Prealpha trim pump leak

    Thanks Kenny I appreciate the help i have o ring kits ill go Head and pull the pump and get that flattened out and sealed up
  3. T

    Prealpha trim pump leak

    So I realized after I filed up the dang res for the trim pump it leaks almost all of it out into the boat just siting. Looks like the screw heads is where it’s comming from do they make a gasket for that? I figure I have to pull the pump off (while wiring new solenoid anyway) then I can clean...
  4. T

    Trim Pump Wiring Help Please

    Sweet thanks man I’ll do that tomorrow 🤙🏻👍🏻
  5. T

    Trim Pump Wiring Help Please

    So if I split the two small terminals with the big ones how it’s in pic and imagine one on the top and bottom then I need to know what big terminal to make + if it matters then I can wire the other wires up fine. Btw it’ll bolt up with either small terminals on top or on the bottom. Top be...
  6. T

    Trim Pump Wiring Help Please

    With reference points from an old topic titled, https://forums.iboats.com/threads/single-solenoid-trim-pump-wiring.580242/ I got a new solenoid but B and D are on one side, 'how do I wire this in then? Thank you...
  7. T

    Mercruiser gm 2.5 cranks no start

    ok have a 81 kayot with a gm Inline 4cyl I had running but needed carb rebuilt. So rebuilt carb put new plugs wires cap rotor and pertronix module with flame thrower coil. Changed head gasket coz it was bad also. I reset valves then it would run but worse as we ran it. Was horrible inside...
  8. T

    1984 omc 2.5l ignition/coil problem

    ok first off i am new to I/O boats. i am trying to get my engine started and had a no crank and no spark problems. after going thru the troubleshooting for cranking i located the problem in the slave solenoid.. put bypaqss wire on and cranks with key (woohoo me) i tried going thru the...
View older results
Top