Search results

  1. Jonboat2Bassboat

    How to match a compressor with an HVLP paint gun

    Re: HVLP and paint additives Re: HVLP and paint additives OK, here is the second coat of marine primer. Came out MUCH better but switched to a cheap foam brush. In my opinion, the "China Bristle" brush from Wooster was a waste of money. After cleaning the brush in soap and water, the ends...
  2. Jonboat2Bassboat

    How to match a compressor with an HVLP paint gun

    Re: HVLP and paint additives Re: HVLP and paint additives Just applied the first coat of Aquagard 190 Marine Primer for below waterline use. Used the roll and tip method and did not thin the primer. It did not come out as smooth as expected. Used a high density 6" foam roller and a 3" "China...
  3. Jonboat2Bassboat

    How to match a compressor with an HVLP paint gun

    Re: HVLP and paint additives Re: HVLP and paint additives Haven't priced out the PEX or ABS yet but will do. Got the PVC because it is rated for 600 PSI where the CPVC is only rated for something like 100, well above the 60 PSI for house water pressure but well below the 125 PSI needed for an...
  4. Jonboat2Bassboat

    How to match a compressor with an HVLP paint gun

    Re: HVLP and paint additives Re: HVLP and paint additives Waiting for a good painting day so cut and carpeted the floor panel. Plan to roll and tip the Aquigard Primer #190 with a foam roller below the waterline and top cote that with Aquigard Alumi-Koat bottom paint, also roll and tip method...
  5. Jonboat2Bassboat

    How to match a compressor with an HVLP paint gun

    Re: HVLP and paint additives Re: HVLP and paint additives The photo is the steering console and adjustable base painted today with Rust-Oleum Marine top cote. Had brush painted one coat of Rust-Oleum Marine primer last year. Thought by sanding out the brush marks with 220, spraying on a second...
  6. Jonboat2Bassboat

    How to match a compressor with an HVLP paint gun

    Saw the following article on line. Just got an HVLP paint gun to use with my 20 gal, twin piston, belt driven painting compressor. Compressor puts out 9 SCFM@40 PSI and 7.5 SCFM@20 PSI. Gun requires 6.5SCFM@40 PSI but 7.2SCFM@40 PSI for continuous use. According to the 15% rule in the formula...
  7. Jonboat2Bassboat

    Jon boat to Bass boat project with photos

    Converting an old Jon boat to a bass boat. Used angle aluminium to extend the front / rear decks and move the seats forward and lower them. Will use poly coated carpeted plywood panels for decks. Moved the console forward, added a new no feedback steering cable and steering wheel, sanded with...
  8. Jonboat2Bassboat

    Marine or Exterior plywood for Jonboat deck

    I am extending the front and rear decks on an aluminium Jonboat and upgrading the aluminium sheet metal floor. These will be surfaced with marine carpeted plywood panels and screwed onto the boat as a unit with SS screws. Been reading the repair forums here and seems there is no clear answer...
View older results
Top