Search results

  1. L

    How do I fix this in my bilge?

    Hello, I need some help trying to figure out how to fix this issue I have in my bilge. It seems like there is water seeping from beneath the bilge through fiberglass. How do I solve the issue? I want to fix it before it gets worse. Here are some picture for reference:
  2. L

    Mold/mildew buildup on exterior. How to stop and remove

    Hello everyone, I started this thread in a different section, but I want to post it here since its more specific. I have an 88 sun runner weekender and lately it has been building up with mold/ mildew all along the stern of the boat. I already cleaned it up once with bleach, but it's back...
  3. L

    Mold/mildew buildup on exterior. How to stop and remove

    Hello everyone, I have an 88 sun runner weekender and lately it has been building up with mold/ mildew all along the stern of the boat. I already cleaned it up once with bleach, but it's back again. What is causing the growth and how do I stop it? Thanks in advance.
  4. L

    How to properly select volvo penta shift cable

    I am in need of a new shift cable for my volvo penta 280 drive. How do I select the proper cable? Is it by boat length, brand, etc? Thanks
  5. L

    Tilt motor issues

    I am having the same issues again. I got the tilt motor to work some time ago and I went to test it today and nothing. All I heard was the relays clicking but no movement. Also, I seem to be getting some grounding somewhere because when I give the yellow/green wire power is sparks and gets hot...
  6. L

    Volvo penta tilt no up or down

    I connected the 280 Volvo tilt mechanism today and I find that it doesn't go up or down when I use the switch. I decided to test motor directly and it turns just fine both ways. I tried testing the other cables directly and I only hear relays clicking but no movement. Help me test this properly...
  7. L

    Volvo penta throttle shift control wiring

    Hello, I am trying to reconnect the tilt mechanism to the volvo penta throttle shif control however I don't know what the correct connection is like. It's an aq271c with 280 outdrive.
  8. L

    How to install bilge blower hose to vent?

    I went to install the bilge blower hose on the vent the other day and couldn't figure out to keep it positioned in the vent hole without falling. Is there a tape or other method of keeping it in place in the vent?
  9. L

    Critic my bilge pump mount location

    Hello everyone, I am at the point where I am going to install my bilge pumps. I have 3 pumps 1- 800gph as primary, 1-1500 and 1-2000gph which are both my secondary/ emergency pumps. Take a look at the pics and let me know If I am on the right track. Nothing is bolted down yet, this is just a...
  10. L

    Bilge pump placement

    I am still debating where and how to instal my bilge pumps. I have a stern drive so I plan to put one very close to the transom which is the lowest point. But the other pumps I am unsure how to install them. The bilge area is kind of a "V" shape and then has the walls on the side. What is a good...
  11. L

    Two bilge pumps or one big pump as secondary

    I am finally installing bilge pumps in my 24ft sunrunner. I currently have a 1500gph pump and I know I need more. I was thinking of using a 2000gph in conjunction with the 1500gph as sencondary pumps. Does it matter if I use 2 pumps or 1 big pump? I am planning on using a 600gph pump as primary.
  12. L

    Bilge Blower Installation

    I am in the process of installing 2 bilge blowers in my 88' Sunrunner Weekender and I would like some advice on the proper way of doing it. I am confused about a few things such as, exhaust vents and intake. What is the proper routing of the hose,etc? I decided on 2 blowers for more protection...
  13. L

    Remind me how to properly wire my alternator

    I want to make sure I wire my alternator properly. Can someone please remind me how it is wired. It is for an AQ271c with a 280 outdrive. I would like to finish this on the weekend. Thanks
  14. L

    What is this part called and what is it used for?

    Hello, I have this part that I am unfamiliar with. It has a rubber hose connected to the side of the oil pan. It has wires coming from it, however I don't its function. Help me identify it, please.
  15. L

    Need replacement crank pulley for AQ271c

    I removed my raw water pump because it was bad and noticed the crank pulley was rotting because of leaking water from pump. Its not safe to continue to use, however I am having trouble finding a replacement. I have been looking at chevy 350 crank pulleys, some are close but not exact. Is it...
  16. L

    Fuel line and fitting questions

    I am going to be redoing my fuel lines with the appropriate marine grade lines and I wanted to know what the rules are for using fuel filters, fuel pressure guages and those quick disconnect fittings.
  17. L

    How do to tell if my alternator is ignition protected?

    How can I tell if my alternator is marine rated and not for a car? Thanks
  18. L

    Fix Volvo Penta Tilt mechanism or buy one?

    I took the tilt mechanism out of the boat this past weekend and noticed that it needs fixing. Half of the base the bolts to the transom area is broken and missing. The end of the mechanism where the rod comes out of has a crack all the way around it. Seems like they tried fixing it somehow and...
  19. L

    Is there a tilt gauge for a volvo penta 280 drive?

    I was looking at the boat manual and I noticed that it came with a tilt gauge for the 280 drive, however I think the previous owner removed it. There is no trim on that drive so I just need a tilt gauge that is compatible. Where can I find more info about it?
  20. L

    How to remove seawater pump on aq271c?

    I noticed a small leak at the seawater pump today and decided to check it out. I was able to remove the impeller and housing from the crank pulley, however I can't seem to separate the impeller housing from the part that bolts to the crank pulley. How do I separate the two?
Top