Search results

  1. F

    Suzuki DT4

    I am looking at buying a 1991 Suzuki DT4. 4 HP, very low hours, like 10-15 total and owned by an older gentleman. In almost new condition. What do you think it's worth?
  2. F

    Needle and Seat Adjustment

    I have an 89' Johnson 110 and one of the carbs is pouring fuel. I have the rebuild kit and am going to start on it tonight. When I install the new needle and seat what kind of adjustments do I need to make? And any suggestions on how to make this process go smooth, it's my first rebuild.
  3. F

    1989 Johnson pouring fuel

    Re: 1989 Johnson pouring fuel Yes they are plastic, but not leaking from there. The picture below isnt my carbs but look exactly the same. The arrow is where the fuel is coming out, those 2 metal pieces.
  4. F

    1989 Johnson pouring fuel

    I have a 89' Johnson 110 VRO. I have replaced the VRO system and mix the fuel now. The lower carb is pouring fuel out and leaking every where. The motor still runs but fuel is going everywhere. I have pulled apart both carbs, cleaned them and tightened everything down. Any ideas why this is...
  5. F

    Johnson 110. 1989. Need help

    This was my original thread. http://forums.iboats.com/showthread.php?t=480630 I took the old VRO pump off and got the one everyone suggested. Mixed 50:1 and in the lake it will not go over 2k rpms even at WOT. Debating on rebuilding the old VRO pump. Please help me if you can. Thank you.
  6. F

    And the million dollar question

    From the thread, http://forums.iboats.com/showthread.php?t=480630 How do you connect the hose from the fuel pump to the intake, they are like 1/4 away and the hose can't make that kind of angle. Please help.
  7. F

    1989 Johnson 110

    I am having a fuel delivery issue and I am not sure what it is. I am thinking its either fuel pump, primer bulb, fuel filter or I was getting a vapor lock with a gummed up gas tank breather. I am looking on this website and I do not see a fuel pump, just a kit. Mine has the VRO oil injected...
  8. F

    Johnson 110

    I have a 1989 Johnson 110. I took my boat out yesturday and it would idle okay when sputter out and die unless i gave it some throttle. Then I would open it up, get the boat planed out for ~ 20 seconds then I could watch the RPM's drop quick and the motor would die. I have no idea whats going on.
  9. F

    Used my Johnson over the weekend, now I have the drip.

    I have an 89' Johnson 110. Oil injected. I started it for the first time since the fall. I ran good but when I shut it off alot of black oil and oil water mix was coming from the exhaust area. I let if sit for the night and had a nice pool of oil on the ground. Cleaned that up, checked again the...
  10. F

    Trailer Bearing rebuild

    I have a 17'9'' Bass boat on a Tetra trailer with bearing buddy's and want to rebuild them. Anyone have a write up on how I can do this or explain to me how to get the hub opened up so i can check the bearings? Thank you.
  11. F

    Good grease cleaner

    I need to clean the grease off my trailers rims from the years of use. What is a good grease cleaner? Should I just try engine degreaser? I need something that won't eat away the crome, thank you.
  12. F

    Trolling motor, 2 blade or 4?

    I have a motorguide magnum 740 trolling motor with a 4 blade motorguide ninja prop. I have broken 2 of the 4 blades off and need to replace the prop. In everyones experience is it better to have a 2 blade or a 4 blade?
  13. F

    2'' drop

    I tow a 18' bass boat with a Jeep Cherokee and it squats the Jeep down pretty good ~2000lbs. I currently have a 2'' drop off the hitch, do you think it would tow better or worse if it has a 2'' rise? Thank you.
  14. F

    What do you tow....?

    My boat and tow rig. 1990 Cherokee 4.0L. 1989 Kingfisher Bass boat 18'.
  15. F

    New prop size-what to expect?

    I have a 1989 Johnson 110 with a 13 3/8 x 17 prop. Today I bought a 13x19. I was told that I should expect a little more speed but less towing power. The 17 pitch prop ran about ~5800, and was told this one will run at ~5500. Should I expect a speed increase or will I be below the recommended RPMs?
  16. F

    Priest Lake ID

    Anyone fimilar with Priest Lake in ID?
  17. F

    Proper RPM range.

    I have an 89' Johnson 110 and was wondering if anyone know the right RPM's I should be at when at WOT. I dont have a manual so all info will help. Thanks.
  18. F

    Tow rig tires.

    My tow rig needs new tires. Being this is a TOWING thread I figured it'd fit. If anyone knows I would really appreciate it. I currently have 255 85r16's and I cannot find any. So on craigslist I can get some 265 75r16's and was wondering if these will be okay. The current tires are not hanging...
  19. F

    Motor Muffs

    So when using the motor muffs, what can happen to the water pump/lower unit, with all that water rushing in. Obviously your water pump wouldnt be taking in the amount of water or under that pressure in the lake. Can those muffs blow the seals? Thank you.
  20. F

    Motor Muffs

    So when using the motor muffs, what can happen to the water pump/lower unit, with all that water rushing in. Obviously your water pump wouldnt be taking in the amount of water or under that pressure in the lake. Can those muffs blow the seals? Thank you.
Top