Search results

  1. phoenixgold2100

    trim tilt fluid johnson 150

    I just pulled off the cap for the trim tilt resivoir engine all the way up and it comes shooting out. I have read it is supposed to be at level with the hole is this right for the engine? or should it be filled as much as possible?
  2. phoenixgold2100

    johnson 150 water pressure

    What should my water pressure be at idle? I removed the thermostats should I have water pressure with them removed? I don't plan on running it without the thermo's I just wanted to make sure water was being pumped. There was a little coming out the tell tale but no pressure. thanks.
  3. phoenixgold2100

    temp gauge

    Does anyone know if temp sender 174675 - 172843 works with a faria temp gauge? I have already ordered the gauges and haven't ordered the temp senders yet. I think the gauges are standard us 33-240 ohms. Is that what these senders put out? I can't see them being strictly omc guage compatable. I...
  4. phoenixgold2100

    johnson temp sending unit omc part number found!

    Part #:OMC174675 1988-2000 outboards. temp sending unit if anyone is having trouble finding one here is the part number.. Not sure if sierra has a cross reference.
  5. phoenixgold2100

    outboard temp sender

    Does this temp sender go in a johnson 150? thanks guys
  6. phoenixgold2100

    1995 johnson 150 temp sender thread size.

    I am looking to install a temp sender. Just wondering what one fits in my head. the gauge is a faria so i need to know what one works for the gauge as well. Ive seen 1/8 thread and 1/4 threads. part numbers would help. thanks Would this sender work? #TS1029 240 - 33.5 ohm RANGE...
  7. phoenixgold2100

    12/24 volt motorguide. how to wire for just 24v

    I have a motor guide trolling motor 12/24 i would like to wire it for 24 only. I do not have a 3 wire plug it has what looks like a marinco 12/24 recepticle with 4 6 gauge wires going to it. two red two black. I have read I do not need 4 wires to run 24 volt so is it just a matter of...
  8. phoenixgold2100

    Prop to pad height johnson 150

    Hey guys I have a 99 stratos 273 vindicator 17'3 6" jack plate and a 3blade 24 raker prop johnson 150 I am trying to get some info on prop to pad height and what prop i should run. I think the prop is 4.5" from pad at the moment. I'm not concerned with holeshot performance i want as much top...
  9. phoenixgold2100

    Prop and pad to prop height

    Hey guys I have a 99 stratos 273 vindicator 17'3 6" jack plate and a 3blade 24 raker prop johnson 150 I am trying to get some info on prop to pad height and what prop i should run. I think the prop is 4.5" from pad at the moment. I'm not concerned with holeshot performance i want as much top...
  10. phoenixgold2100

    1995 johnson rectifier

    Can anyone tell me how to test my rectifier I have hooked an ohm meter to it and tested every lead reversed the probes and the only one i get a reading from is the gray tach wire. this mean it's a bad rectifier 585219 95 johnson 150 also would i add atf to my trim ? thanks guys first boat and...
  11. phoenixgold2100

    testing rectifier johnson 150

    I have read online when testing the rectifier if you connect ohm meter to ground and touch the rectifier leads you should only get a reading one way...my problem is I only seem to get a reading of 10.2 from the gray tach wire. I touch the leads to the yellow plug either side, and nothing happens...
  12. phoenixgold2100

    overheat sensors johnson 150

    I am getting constant alarm when key is turned on I have checked voltage on the over heat wire and I am getting 11 volts from it and when i hook up a test light to it Purple and tan the test light comes on so i have a ground in the tan wire I guess my question here is is there anyway to check to...
  13. phoenixgold2100

    BOB JOHNSON Wiring issues! again!!!!!!

    I have a 99 johnson 150 and the alarm goes on when the key is turned on and will not shut off (engine not running) so I know it's not an over heat issue. I disconnected the tan wire from the alarm and it kills alarm but when key is first turned the alarm has a dying chirp sound coming from it...
  14. phoenixgold2100

    engine years

    Is there anyway to tell what year a johnson 150 is without the serial number plate? thanks
  15. phoenixgold2100

    1999 johnson 150 guages not working

    Hi guys I recently bought a 1999 stratos 273 vindicator with a 150 johnson I am pretty sure this boat was a repo and the ignition switch is new. My problem is none of my guages are working. they have power to the lights in them and the fuel guage will move a tiny bit when the ignition is turned...
View older results
Top