Search results

  1. AGENT 37

    F80 Pressure Control Valve?

    I'm ordering thermostats and a few other parts for my 1999 F80 and was reminded of a question I've had for a while...... What does the "pressure control valve" that is in the exhaust cover actually do? (Item 19, 20, and 21)...
  2. AGENT 37

    Alaskan fishing in NE Florida

    I may be moving from Kodiak, AK down to the Jacksonville, FL area this next summer. I have never fished the Atlantic or Gulf and am trying to get a realistic idea of what I should expect. I've spent my whole life fishing the North Pacific. Here's the kicker: I'm going to try to do things a...
  3. AGENT 37

    Manual Relief Screw Stuck

    The tilt trim system shorted out on one of my F80 and melted the wires to the TnT motor while we were returning to port last night. The outboard is stuck in the down position. The manual relief valve screw is stuck..... I broke two screwdrivers trying to crack it open to raise the engine. I...
  4. AGENT 37

    Cooling system anomoly

    1999 Yamaha F80 When the motor is running in the water or on a flushing adapter I get a good tell-tale stream. When I hook up the yamaha hose adapter on the topside and flush with good water pressure I don't get the good tell-tale stream but I get plenty of water coming out of the exhaust...
  5. AGENT 37

    construction financing

    Does anybody have a lender to recommend that finances new boat construction. I am hoping to have a custom aluminum boat built. Our bank approved us for the amount but not the particular boat because it must be 95% complete to write the check. How do you get to that point when working with a...
  6. AGENT 37

    704/705 T/T switch compatibility

    Will a 704 (top mount) control box trim and tilt switch rig in a 705 (flush mount) control? .............. an attempt to save bucks. I've gone long enough with the shorted remote control switch un-plugged and I'm tired of going over the transom to trim the motor.
  7. AGENT 37

    Discontinuation of Loran C

    Has anyone heard about the Loran system finally getting taken off line? I just caught word of a message today about shutting down of the USCG Loran station in St. Paul AK next year. I'll read through it later to get the details when I can, but it sounds like it is part of the disbandment of the...
  8. AGENT 37

    Thickness of shims?

    Can anybody able to tell me the thickness of the shims A, B, C, & D for the reverse gear on a 2001 BF90 lower unit. Part numbers are 90538-ZW1-B00, 90539-ZW1-B00, 90540-ZW1-B00, & 90541-ZW1-B00........ Trying to get rid of the fore/aft play in the propshaft after installing new clutch, reverse...
  9. AGENT 37

    BF 90A lower unit issues

    1998 Honda BF90A It started as a 20" shaft motor which was too short for the transom on the boat. I removed the original Mercury-built lower unit, swapped out the upper shift shaft, extended the water tube, installed studs and a spacer and hooked up a used "newer" Honda-built 25" lower unit...
  10. AGENT 37

    Replacement skeg for BF 90

    Well the monster that dwells at 32' out in the channel out in the bay came up and bit off my skeg and chewed up the prop this evening. Go figure. Does anybody have a good source to buy a replacement skeg to weld on? Even a Honda part number would be helpful. It is for a Post 1999 gear case for a...
  11. AGENT 37

    Replacement for Eagle GPS

    I have an Intellimap 320 GPS by Eagle. I bought a Nauticpath west coast/AK chip for it that is for Eagle/Lowrance units and they don't work together. I'm thinking about getting a new GPS unit that is compatible with the chip because I can't return the chip. I need a good suggestion on a unit to...
  12. AGENT 37

    Jack Plate

    Does anyone have a jack plate that allows the motor to be lowered below the normal height of the transom, or are they all designed to raise the motor? I have a recently purchased 22' aluminum Bayrunner with a 24.5' transom. It has a 90 HP long shaft Honda that sits too high and has a...
  13. AGENT 37

    Same part?

    Is the five inch spacer that goes on the midsection of a extra long (25 inch) BF115 the same as one for a BF90. I know the lower units are different, but I'm hoping that if I pick up one of these used that is really cheap I won't have to sell a kidney to pay for a new one.
  14. AGENT 37

    Won't shut down

    My F100 is starting to do this..... it's running so well that it doesn't want to stop. I turn off the key and it keeps on running without a miss, I pull the kill switch and it continues to run. If I rev the motor up a little in neutral and drop the throttle back down it might shut off. I tried...
  15. AGENT 37

    Anybody use LORAN

    Does any one here still use LORAN for navigation? Just curious.
  16. AGENT 37

    Sorce for 90 HP lower unit

    Some idiot rigged a long shaft motor on a 24 inch transom so it sits too high and is sucking air into the prop and can't be trimmed to bring the bow up out of the water Other than ebay, does any one have a good source to get an extra long shaft lower unit for this 97-98 motor (without the EPA...
  17. AGENT 37

    Crack in radar dome

    I bought a boat with some old electronics (1992 bayrunner) It has an IMPULSE Loran/fish-finder unit, the fish finder part works.... GPS is the way the world gets around now and I have never worked with LORAN. I don't even know the status of the LORAN network now. All right... I'm a military...
  18. AGENT 37

    Trim tabs w/o switch or wiring

    I've got a set of used Lemco electric trim tabs (actuators and stainless 12x12 tabs) that I want to install. they were sent to me with the wiring cut off about 6 inches from the motor. Who has a suggestion of a good way to wire them? I was thinking about trying a couple of standard 3 position...
  19. AGENT 37

    Valco BR 22

    Does anyone have anything good, bad or otherwise to say about an aluminum 22' Bayrunner Cuddy with a T-top? I just put a deposit on a pristine 1992 with a 1998 BF90 Honda. I've run a bunch of Valco boats before, but nothing bigger than an 18 foot center console. I'm going to take it up to...
  20. AGENT 37

    Fuel economy chart

    I'm looking for a fuel economy chart for a 1998 BF90 (RPM/GPH) I got one for a fuel injected motor but want one for the carburated model. I was also looking for some for the 115. All I've found so far is one for the fuel injected 90 and the fuel injected 135.
Top