Search results

  1. CamaroMan

    still no idea on model / year? No S/N when bought - 80s mariner 60hp 3 cyl

    Hi guys - so im still baffled as to getting confirmation on my motors year and model - No autoblend 3 Cyl Dual carbs Plastic split case (clamshell) cowling with front clips and cover. Electric start No Trim/Tilt fitted The upper carb has a different jet size - iirc 72 and 74 or something like...
  2. CamaroMan

    87 mariner 60hp stator and trigger readings-anything bust?

    Hi all.. Ok so stuck in and endless loop with bust motor.. 3cyl ran fine, then suddenly high speed miss came in, got worse and worse.. So I threw my stator into the fire today to burn off plastic!! Plz tell me I didnt do this for nothing.. Ok my red wire was shorting to the black ground...
  3. CamaroMan

    Prop pitch for 1987 Mercury Mariner 60hp 3 cyl? 4.2m inflatable rib

    Hi everyone, spun prop hub on first day out last week - ive pinned it now, but need some help on what pitch for my motor? According to my manual WOT rpm is low - 5300, gear case ratio is 1.64 : 1 - any ideas? Ive played with the merc prop selector and i get mostly 14-15, and 13 in some cases...
  4. CamaroMan

    Sealing slow leaks on oldish RIB?

    Hi all - got my first rib last month.. Just got motor setup nicely (still have to decarb it).. I did some leak detection and found one micro pin leak which I successfully fixed with superglue, and one seam was leaking badly which I reglued - one valve was also leaking slightly. Now I cant seem...
  5. CamaroMan

    Cant access website outside US??

    Hi - ive noticed the site simply does not work outside the US!! Im in South Africa and desperately looking for assistance with my merc/mariner outboard - I have to run thru a VPN connection to use the site! this is quite ridiculous - why would you block other countries? Please remove this...
  6. CamaroMan

    Need help! Primary Pickup / Idle timing setup - 86 Mercury/Mariner 60Hp 3 cyl

    Hi all - bought a inflatable last month - had some trouble getting everything setup correctly.. My throttle linkage bolts were mostly corroded - So i took it apart - one had to be drilled out / retapped - anyway - Im curious how to set the base idle/advance? I have confirmed the pointer...
View older results
Top