Search results

  1. P

    i need help bad please

    --------------------------------------------------------------------------------<br />i have a 1960 johnson supersea horse 40hp rds 22 seral # 2128547 i need a head gastket.head cover gasket water pump impeller.thermostat and do i need any gaskets when i change impeller for the lower unit any...
  2. P

    any one have part numbers i can use

    i have a 1960 johnson supersea horse 40hp rds 22 seral # 2128547 i need a head gastket.head cover gasket water pump impeller.thermostat and do i need any gaskets when i change impeller for the lower unit any help i would be greatful for o and when i put the new compression relief valves in do i...
  3. P

    johnson info please

    does any one have part numbers for my 1960 rds-22 super sea horse 40hp i need part numbers for head gasket.head cover gasket.water pump impeller . thermostat.i dont need the carb one and i dont need the one for the o rings for the valves in the compression relif valve o and do i need ant when...
  4. P

    johson question

    i have a 1960 johnson rds22 it has a compression relief head on it well i have to change the releif valves in the head i have 2 new ones but the rubber o-ring that goes on the stem to seal the small hole are not on these new valves one of the old valves has one but it is real hard so what kind...
  5. P

    compression relief valve question for a rds 22 1960 40 hp johnson

    i hope some one can help me R.johnson sent me two new valves on my old ones one has a o ring on the stem like a seal but the new ones he sent me dont have the o ring dont know if needs it and what there are made of because the one valve that still has one it is hard as a rock the one that is...
  6. P

    R.Johnson

    hi the valves came on friday thanks so much but i have one question on the valve stem one of my old ones has a o ring im guessing its a rubber o ring to seal the valve stem not sure i called a boat motor store she looked on a brake down picture she say the o rings are in the pic
  7. P

    R.Johnson

    did you get the e-mail with my address if not i can send it again
  8. P

    R.Johnson

    you said you have a set of them valves and i could have them for free but only one thing i dont know how to get them because i cant drive to Iowa to pick them up little to far to drive from eastern shore maryland to iowa i would just buy a new motor but here they are very costly even used ones...
  9. P

    johnson question pleas help

    ihave a 1960 super sea hores 40 hp johnson rds 22 well the compression release valve one is not sealing it keeps blowning out the compression release valve dome gasket and water was comming out of the dome joe revees told me to pull the head and take the valves out well i did and the top valve...
  10. P

    new update on the 1960 40 hp johnson

    well i took the head off boy o boy well the one valve was ok but the other i had a time getting it out a good bit of carben on it got it out and there is like a spacer or o ring that is on one but gone on the one that was leaking and i found out where the water was comming from the valve burned...
  11. P

    help hope i have not damaged any thing

    i have a 1960 johnson super sea horse 40hp/rds 22 well it has the compression relief valve head it keeps blowing the gasket on the top cover i have put a new one in three times in the past year i even used high temp rtv sealent blowed the rtv all the way out last saturday i went out fishing and...
  12. P

    question did not get answered???

    i rebuilt the the carb a around the high speed jet is driping gas very very slowit takes about a day or two to see it and i had in a barrel running and i see a little green oil running down the lower leg of the motor the part that is in the water but all and all it ran rel good but the gas...
  13. P

    another carb problem???????

    i just rebuilt the carb on my 1960 super sea horse 40 johnson well i got it running saturday well i have two questions one is i ran it in a cut off steel drum i seen some 2 cycle oil runing down the bottom part of the lower unit the part in the water plus i think i have gas leaking around the...
  14. P

    float needle spring question ????

    the other day i posted about the float needle spring well im rebuilding my carb on my 1960 johnson super sea horse 40 well the little spring broke and i cant find a new one but i did find a heavy twist tie like a bread tie i took the plastic covering off and it looks and feels like the spring...
  15. P

    dumb question

    rebuilding carburetor with a new kit and the little thin wire that goes on the float needle broke will it be ok if i dont put in :eek: :( :( :o :eek:
  16. P

    quick help with a johnson

    i have a 1960 johnson super sea horse 40hp rds22 im rebuilding the carb with a new kit i put plastic washer 2 packings then a nother washer in the low speed and four packing in the high there is a gasket for the high speed nozzile does it go in this carb i have a and did i do the plastic washers...
  17. P

    caburetor question rds 22 super sea horse johnson 40 hp

    joe reeves said 4 packing in the high speed jet and two in the low speed jet but does both plastic washers go on low speed like the local boat shop said or does one go in the high speed jet the local shop said the washer 2 packings and the other washer in the low speed jet no washers in the...
  18. P

    help with a carburetor

    i have a rds 22 1960 johnson super sea horse 40hp o/b i got a re build kit but i dont know how many packings go inthe the high speed and the low speed jet the old ones was so bad could not use them to put it back togeather and any other gaskets i for got help please i got the 439074 kit so there...
  19. P

    motor trouble help ...............

    i have a 1960 johnson super sea horse 40hp it starts good but it smokes a little more than i like and if i leave the cover in front of the carb closed it will not pick no speed but if i leave it open it runs fine and like i said it somkes alittle more now than it did before the lose of power...
  20. P

    motor info

    i have a evinrude 50hp m# 50173S/s#E07338 i want to know year and a little info about this motor plus it has ele shift and it is stuck in gear any info would help .
Top