Search results

  1. N

    4.3L MPI 2007 Searay Sport 185. Single Alarm at 20 RPMs and higher

    I also found a small leak coming from the remote oil filter. Looks like its leaking out the sides. Is it possible to have too much oil pressure? If so what could cause that?
  2. N

    4.3L MPI 2007 Searay Sport 185. Single Alarm at 20 RPMs and higher

    Installed water pressure switch. Alarm still sounded at 2000 rpm’s
  3. N

    4.3L MPI 2007 Searay Sport 185. Single Alarm at 20 RPMs and higher

    Guess what idiot just picked up the 170 dollar part and heading back
  4. N

    4.3L MPI 2007 Searay Sport 185. Single Alarm at 20 RPMs and higher

    Im gonna look further into it. $178.00 is pretty steep for the switch
  5. N

    4.3L MPI 2007 Searay Sport 185. Single Alarm at 20 RPMs and higher

    3 wires
  6. N

    4.3L MPI 2007 Searay Sport 185. Single Alarm at 20 RPMs and higher

  7. N

    4.3L MPI 2007 Searay Sport 185. Single Alarm at 20 RPMs and higher

    I also thought about that. I just changed the impeller I believe 2 years ago but can take a look at it.
  8. N

    4.3L MPI 2007 Searay Sport 185. Single Alarm at 20 RPMs and higher

    Alright. I did have a call out to pick one up, which I can do tomorrow, but there like $178.00. Is it possible to get one that from Advanced Auto or Napa. I found them on amazon for like 40, but id prefer to have it immediately.
  9. N

    4.3L MPI 2007 Searay Sport 185. Single Alarm at 20 RPMs and higher

    Yes, its on the trailer. I tested the water pressure switch on the power steering cooler earlier this morning. With the sensor disconnected I ran the engine on the muffs and when it got to 2000 rpms, the alarm sounded and went into guardian mode. Therefore cant I rule out the water pressure...
  10. N

    4.3L MPI 2007 Searay Sport 185. Single Alarm at 20 RPMs and higher

    Not sure if I did it correctly but with the engine off and checking the switch it gave me a reading of 1200
  11. N

    4.3L MPI 2007 Searay Sport 185. Single Alarm at 20 RPMs and higher

    I also disconnected the ingear switch like you said (boats on the trailer) and revved it to 2000 rpms and the alarm still sounded.
  12. N

    4.3L MPI 2007 Searay Sport 185. Single Alarm at 20 RPMs and higher

    Not sure if I did it correctly but with the engine off and checking the switch it gave me a reading of 1200
  13. N

    4.3L MPI 2007 Searay Sport 185. Single Alarm at 20 RPMs and higher

    Give me a few, grabbing the multimeter and going to check.
  14. N

    4.3L MPI 2007 Searay Sport 185. Single Alarm at 20 RPMs and higher

    I am just as baffled. But those are the only two connectors I see near the plate.
  15. N

    4.3L MPI 2007 Searay Sport 185. Single Alarm at 20 RPMs and higher

    Yes. The larger one thats in my hand above the blue connector.
  16. N

    4.3L MPI 2007 Searay Sport 185. Single Alarm at 20 RPMs and higher

    The one above i disconnected before starting and the engine wouldn't turn over. I then replugged it in, started the engine, then pulled it again and the engine died.
  17. N

    4.3L MPI 2007 Searay Sport 185. Single Alarm at 20 RPMs and higher

    I did. Boat engine died when I removed it.
  18. N

    4.3L MPI 2007 Searay Sport 185. Single Alarm at 20 RPMs and higher

    Did also. Killed the engine
  19. N

    4.3L MPI 2007 Searay Sport 185. Single Alarm at 20 RPMs and higher

    Disconnected the blue connection below it. Alarm still went off at 2000 roms
  20. N

    4.3L MPI 2007 Searay Sport 185. Single Alarm at 20 RPMs and higher

    Boat won’t start with it disconnected
Top