Search results

  1. Woodonglass

    Yukon Delta HB Rebuild

    Re: Yukon Delta HB Rebuild One layer of 1.5oz CSM is sufficient for the underside of the deck. These should help you figure out how to do it. (Click the pics to enlarge):)
  2. Woodonglass

    1961 Lonestar Flamingo - SPLASHED w/Pics

    Re: 1962 Lonestar "Flamingo" - I finally Started w/pics Re: 1962 Lonestar "Flamingo" - I finally Started w/pics Here she is... 6 hours and Totally dry. That Hardener is AWESOME!!! Sunlight Really shows me How BAD of a Painter I am and my Prep was NOT as good as I thought. Oh well, Lots better...
  3. Woodonglass

    my first time replacing a transom were to start

    Re: my first time replacing a transom were to start You're gunna get a 4 1/2 inch grinder and grind all that crap off the hull, then like Kotte and RickRyder said you'll bed your new stringers in Peanut butter or PL Adhesive. Here's a drawing that illustrates the procedure. (click the pic...
  4. Woodonglass

    1971 Winner Bimini 17' Tri Hull

    Re: 1971 Winner Bimini 17' Tri Hull Tip:Use the IMG code to place your pics directly in your thread instead of the LINK. (click the pic to enlarge) 1.) Grind the glass under the lifted area and sand the underside of the lifted piece as best you can and then mix some thickened resin with...
  5. Woodonglass

    1984 glastron runabout 1st project boat!!

    Re: 1984 glastron runabout 1st project boat!! bHoff, TIP: Use the IMG code to put your pics directly in your post. It works a whole lot better than posting the link. (click the pic to enlarge) What have you done to ensure that the transom is good? You might want to be prepared to have...
  6. Woodonglass

    MFG Niagara seat mounting

    Re: MFG Niagara seat mounting I'd suggest making some of these.. (click the pic to enlarge)
  7. Woodonglass

    1972 19' AeroCraft Help Formulating A Resto Plan

    Re: 1972 19' AeroCraft Help Formulating A Resto Plan Welcome to the iBoats Dry Dock! That is a REALLY NICE LOOKING RIG!!! BUT.... The description you give of your transom and the size of that motor absolutely DICTATES that it be replaced. NO BAND AIDS. In my opinion there is NO WAY you should...
  8. Woodonglass

    What type of adhesive to use?

    Re: What type of adhesive to use? Welcome to iBoats! You don't need any kind of wood "LIP" to attach the deck to. Here's the recommended method for producing and installing a deck. You'll need unwaxed Laminating Polyester Resin, 1.5oz CSM(chopped strand mat) and 1708 biaxial cloth. Precoat...
  9. Woodonglass

    1973 18' starcraft starchief V

    Re: 1973 18' starcraft starchief V Hey Brig FYI You can copy the IMG code from photo bucket and paste it into your post. It will put the pic directly in your post and NOT the HTTP Link Here's how... (click the pic to enlarge)
  10. Woodonglass

    Dealing With Rotten Wood

    Since we seem to perpetually be dealing with this subject here on the forum, I thought this OLD article from "Back in the Day' would be entertaining to some of us. Enjoy!!! Chemotherapy for Wood Rot Once rot gets a toehold in wood, it is difficult to cure completely, like a...
  11. Woodonglass

    Flipping Her Over

    Re: Flipping Her Over This should show you what I mean. Drive to stakes to keep her from dragging across the yard. Clamp or tie the 2x4's to the top then throw a rope around em and pull her over. (click the pic to enlarge) You might want to build a rolling cradle like I did for mine...
  12. Woodonglass

    Transom Repair

    Re: Transom Repair Welcome to the iBoats Dry Dock!!! I have posted a drawing of the basics for creating a transom. Every boat is different. Posting pics would be a big help so we all can see what you're dealing with. The cut in your transom skin will NOT be a big problem so not to worry. My...
  13. Woodonglass

    Bond new floor to hull

    Re: Bond new floor to hull You do not have to use epoxy unless you choose too. It is much more expensive than polyester resin. Here is how I recommend installing a deck. I recommend using Unwaxed Polyester Laminating Resin, 1.5 oz CSM (Chopped Strand Mat) and 1708 Biaxial Cloth. 1/2", 5/8" or...
  14. Woodonglass

    Stringers rotted....

    Re: Stringers rotted.... Yep Arauco is good Stuff. Go for it. I posted a Drawing of how I'd recommend you attach the stringers to your transom and how to do the bilge area with drainage. NOT set in stone but I think it's a good method. Your boat so do as you think best. Use 1" pvc, that way you...
  15. Woodonglass

    Newbie restoring '74 Starcraft Capri 15'

    Re: Newbie restoring '74 Starcraft Capri 15' Transom - Fit the 1.5 oz CSM to the Plywood no need to tab. Make SURE to wrap the edges of the ply with the CSM and PRE Coat the edges with resin. Before installing drill some 1/2" holes in the transom to relieve air pockets. The PB will fill the...
  16. Woodonglass

    Full Restore 1977 Bayliner 2755 Victoria "The Lumbering Oaf"

    Re: Full Restore 1977 Bayliner 2755 Victoria "The Lumbering Oaf" Yeah, you could use the woven roven. Here's a drawing of how I recommend building a transom. You could substitute the woven for the 1708 I would still use two layers. I would recommend the 404 Poly resin. I do not think you need...
  17. Woodonglass

    Fiberglass transom repair

    Re: Fiberglass transom repair Here is a drawing of how I recommend you do a Transom. I recommend Polyester Resin (3Gallons) 1.5 oz CSM mat(4yds) 1708 Biaxial Cloth(4Yds) Cabosil, and Chopped fibers to make Thickened Resin. (1/2 lb each) (click the pic to enlarge)
  18. Woodonglass

    Gettin Ready to Paint your boat..., You might want to check this out!!

    I just saw this from a guy on Fiberglassics. Looks interesting. I have NOT used it so I do NOT have any experience with it so cannot say if it is Good, Bad or Indifferent. Just thought I'd pass it a long in case someone out there has used it and could help us out with their opinion. I might get...
  19. Woodonglass

    Mounting Pedestal Seats

    Re: Mounting Pedestal Seats Here's a better pic for your review. Hope it helps. (click the pic to enlarge)
  20. Woodonglass

    Newbie restoring '74 Starcraft Capri 15'

    Re: Newbie restoring '74 Starcraft Capri 15' Welcome to the iBoats Dry Dock! Nice project you got there. I recommend MDO plywood or AC Fir Ext. Grade. You can use Marine grade but it is expensive. I have posted some drawings on how I recommend building stringers, transoms, and decks. They are...
Top