Search results

  1. Horigan

    Windshield question

    I think Aldon is a bimini company. I have their bimini with the same logo on my '95 Chris Craft.
  2. Horigan

    SX-M outdrive Oil Plug issues

    Someone here suggested replacing that plug with one that has a Allen fitting, which I bought. Looks way better than the original. Google - Drain Plug, Magnetic, Johnson, Evinrude E-Tech
  3. Horigan

    Trailer sounds like chain is dragging but nott

    At least now you know the hubs/bearings are good.
  4. Horigan

    Jeanneau prestige 36 2001

    First thing I would do is check the turbo. Remove the air filter and see if the turbo vanes spin freely. If it doesn't spin freely, you need a new turbo or turbo rebuild. The supercharger (compressor) is activated by an electrical signal (12V I believe) that engages a clutch on the...
  5. Horigan

    Need help finding plug wires

    When I went through this I went with custom wires as mentioned above that I made myself.
  6. Horigan

    Bellows adhesive or not?

    I use Triple Guard grease.
  7. Horigan

    Cross country trailering advice/tips

    Dexter has you go 30 ft-lbs initially, then finger tight, then only loosen to align cotter pin. Been working for me a long time.
  8. Horigan

    Chain worth it?

    If I were you I would get a bigger anchor and add more chain to your rode, like 50'. On our 10K lb Commander 30 we run 200' of 1/4 chain and another 150' of 1/2" rode, primarily for deep anchorages in BC and southern Alaska. We like the damping that all chain (effectively) provides. Your...
  9. Horigan

    nautical charts

    Check out Maptech. Not sure how far north into BC they go.
  10. Horigan

    Just rebuilt the trim cylinders, now the outdrive won't stay up under load

    Actuators have two ends, rod end where the chrome piston rod comes out aft end of the actuator, and the head end (or blind end) on the front side.
  11. Horigan

    Volvo penta 5.0gxi 3869255

    I don't know this particular engine, but it could be a protective low oil pressure or high coolant temperature indication that's faulty that makes the engine run in limp mode, or whatever the term is for that engine. Usually the system has dedicated switches separate from the sensors that drive...
  12. Horigan

    joystick docking design review

    The only way you can do it with a single drive is with thrusters. Volvo does it with just a bow thruster. I have a joy stick on my twin outdrives and love it.
  13. Horigan

    1996 Four Winns Sundowner with 5.0 Cobra engine and drive

    Perfect! Thank you!
  14. Horigan

    1996 Four Winns Sundowner with 5.0 Cobra engine and drive

    Thanks. Do you happen to have a part number? All I find for 3854539 online is the slotted version.
  15. Horigan

    1996 Four Winns Sundowner with 5.0 Cobra engine and drive

    Where do you get that hex key drain plug?
  16. Horigan

    1996 Four Winns Sundowner with 5.0 Cobra engine and drive

    I get my OMC/Volvo joint venture part numbers here. Drill down to Evinrude, Sterndrive, etc. In the joint venture years the part numbers are the same between OMC and Volvo. The dipstick O-ring is a little larger than the drain plug and overflow plug O-rings. BPR Parts
  17. Horigan

    Towing a 22 foot Islander that was changed from I/O to outboard on bracket.

    I gather the OPs primary question is can the bracket handle the cantilever loads of the outboard out beyond the transom while trailering. I would ask whoever is doing the bracket installation.
  18. Horigan

    !/2 ton Truck towing limitations

    Airbags don't change the weight distribution between the front and rear axles. They just reduce the rear sag by stiffening/raising the rear suspension.
  19. Horigan

    Is There a Repair Kit for Corrosion on the Gymbal Housing?

    If you're able to do it with JB Weld, they'll be able to do it with aluminum.
  20. Horigan

    Did Water Get Into My Gear OIL?

    You need to pressure and vacuum test the drive to determine where it's leaking. Usually it's at the prop shaft seals, but could be shift seal, drain plug/dip stick seals, or input shaft seal.
Top