Search results

  1. S

    Prestone Flush

    Old engine. It can use a flush. And hope to prevent the overheating problems i had before.
  2. S

    Prestone Flush

  3. S

    Prestone Flush

  4. S

    Prestone Flush

    Thanks
  5. S

    1981 Evinrude 35hp question.

    see if you can use the three cog gears as a upgrade. The shift dog engages the cog.
  6. S

    1981 Evinrude 35hp question.

    The biggest nightmare I dealt with when I rebuilt my lower was the detent balls. Made a tool to hold them in place. You might want to do the same.
  7. S

    Prestone Flush

    Any one ever flush there out borde in a barrel filled with something like prestone flush. Watched some you tube videos and it looks like the stuff like saltaway is useless.
  8. S

    Will it Freez

    Thanks
  9. S

    Will it Freez

    I am going to use my boat until the end of January. I flush the motor on the muffs after every trip but can water stay in the engine and freez causing damage?
  10. S

    Power pack or stator???

    Make sure they are tight enough to keep them from arching to he mounting bolt. Anything other that loose is should be fine.
  11. S

    Power pack or stator???

    Make sure the coil bolts are TIGHT.
  12. S

    Rich and Perfect

    Any suggestions on how to test the fuel pump for leaks? I just pumped the primer bulb on the fuel line from tank to pump until it was very firm and I didnt see any external leaks on or around the pump.
  13. S

    Exhaust housing gasket?

    I agree 100%. But do we know if it will affect performance if you have exhaust leaks?
  14. S

    Rich and Perfect

    If all is else is good what about a reed valves? there are two sets in my engine. If one set feeds the lower cylinder and the other feeds the top cylinder is it posable the new byosen reed i install after the rebuild are crap.
  15. S

    Exhaust housing gasket?

    On my engine it is called a exhaust relief. What is dose is allow exhaust pressure and some cooling water out of the engine when the exhaust pressure is not high enough to push any water out of the prop. If you did not use a sealant on the lower unit the water level would be higher that it...
  16. S

    Exhaust housing gasket?

    Do you know if your engine has a exhaust relief port on the back or the engine?Looking at the picture you posted there is a black plastic cover on the back of the engine. With the engine running dose exhaust and water come out of that black cover?
  17. S

    Rich and Perfect

    Is it possible to test the compression in the crank for each cylinder?
  18. S

    Exhaust housing gasket?

    I used high temp RVT. So far everything is good. Just follow the directions on the back of the tube and all should be well.
  19. S

    Rich and Perfect

    Bottom spark plug is light brownish yet the top plug is black. Why?!? Just one carb feeding both cylinders so why would the top one indicate Its running rich?
  20. S

    Boyesen Power Reeds

    Any of you ever use them? If so did you notice any improvement in performance?
Top