Search results

  1. S

    No spark

    Can some one please tell me how to test for voltage at the coil. With the ignition on ill get sparks at the - terminal on the coil when I remove the wire going to the points but Iam not sure how to test to see If I have 12 volts at the + terminal. Is there a way to test the coil?
  2. S

    Can I save my engine?

    I removed the exhaust system from my boat to see what the cause of my overheating problem is. The elbows were somewhat plugged up with rust. My heart sank when I saw that because I got to thinking what the water jackets looked like in the engine. I took the water pump off the engine and a 1/4...
  3. S

    Stupid Button

    We all heard of idiot lights but i have what I call a stupid button in my boat. At the bottom of the shifter there is a button that says throttle only. My guess is that if you push this button and maybe have to hold it in you can give it gas without shifting into gear. Is that the reason for...
  4. S

    Over Heating

    Removed the hose that feeds the engine form the out drive and I am getting a healthy supply of water to the engine but its pegging the temp gauge at 240. This is after replacing a missing freeze plug. Without the freeze plug the temp was steady at 160. Went to remove thermostat and it was...
  5. S

    reverse lock valve

    My reverse lock looks looks like the one in the picture. The plastic hose is cut and there is nothing going to the other fitting. My guess is that as the out drive trys to lift in reverse and force the hydraulic fluid back to the pump the lock keeps this from happing. Therefore the hydraulic...
  6. S

    Out drive water pump killed?

    Can you destroy the water pump buy running the engine without muffs? I had a power steering fluid leak so I took the water hoses off the cooler and ran the engine for a minute to see if power steering fluid was leaking into the cooler. I did start to get some white smoke from the hose that came...
  7. S

    Shift Cable?

    With my out drive down and straight shifting works fine but when i turn the wheel or raise the out drive it seems to be impossible to find neutral and shifting is noisey in any position. This is with the boat out of the water. What gives?
  8. S

    Water from prop and engine

    Just put the out drive on my boat today. Alpha one. Got the hose with the ear muff looking things hooked up to it and ran the engine. everything looked fine but i was getting water form the prop. after looking into that that should be fine. it looks like the water should flow around the forward...
  9. S

    RPM,S and MPH For a 228

    Got my first boat. Fixer upper. It is a 1980 20 FT Wellcraft. Can some one tell me the max rpm and mph to expect? I think the out drive is a 50 to 1. Not sure about the pitch on the prop .Sure that dont help. O yea. 228 305 with a 4 barrel carb. Thanks Chris
  10. S

    Cant get my out drive back on

    Alpha One going onto a 1980 boat with a GM 305. Just would no make the last 3/4 of a inch going into the transom. Made sure the gear shifter was in forward on the boat and OD. Made sure the shifter cable thing was going into the OD right. Did a little hammering with a block of wood but no good...
  11. S

    DAM!

    Spent a good 8 hours putting my out drive together yesterday and it dont look good. When I was given the boat, a 1980 wellcraft with a 305 GM in it the out drive was all apart because the driveshaft was broken where it entered the out drive. After getting things together I noticied that when I...
  12. S

    Seal?

    Going to put my out drive together tomorrow and there is something I need to know. I just cant find any info on what seals the water tube in the upper to plastic one that sticks out of the water pump. Dose the metal upper tube go all the way down to the seal at the bottom of the plastic tube?
  13. S

    This CANT be right!

    Or is it? Just got a new gimble bearing and there is a grease hole in the outer ring between the metal band but there is no hole for grease to get to the bearing. Shouldnt there be a hole in the bearing that is pressed into the ring that lines up with the hole in the outer ring? Hard to explane...
  14. S

    Engine ID

    Just got a 84 Wellcraft with a V8 in it looks like a Chevy but how can I tell if it is a 350 or 305?
  15. S

    Am I Missing Something?

    Is there a gasket that goes between the upper and lower gear case of a Alpha one stern drive. Cant seem to find one online.
Top