Search results

  1. C

    Mercruiser 3.0 Fuel Issues

    For me was just ignorance 😓. I will add the water fuel separator and remove the clear one. The main reason i added was to see why i was having hard start ups and is when i discover that when the engine starts at first the clear filter gets filled with air on the first pump of the fuel pump but...
  2. C

    Mercruiser 3.0 Fuel Issues

    It is between the carb and the pump
  3. C

    Mercruiser 3.0 Fuel Issues

    I always thought it was good to have an inline filter 😓 for extra filtering. I been having hard start ups and while searching the engine i realize the fuel filter is always half full when is cold. Eventually it will fill up when it gets warm and rev up a little. But on the next start up while...
  4. C

    Mercruiser 3.0 Fuel Issues

    The ones that they sell on west marine stores. They are clear plastic filters. I been having this issue and havent figure out whats wrong yet. It is like the fuel pump will pump air when the first start up happens 🤷‍♂️.
  5. C

    Mercruiser 3.0 Fuel Issues

    I changed the check valve going to the tank. Changed the carb and the fuel pump and added a clear inline fuel filter. I notice that the filter always have air on it at the beggining. After a while the filter gets filled all the way and will stay full. However when restaring the engine again...
  6. C

    2002 mercruiser 3.0 issues starting

    Guys i have ran out of ideas. Changed the starter solenoid. Changed the starter but when i attempt to start from ignition key it just clicks. I starter it with a screw driver on the starter and same time with the key and it works but not with just the key. I Notice there is a cable on the...
  7. C

    Do i have a blown head gasket?

    I have 2002 rinker 180 with a mercruiser 3.0. Engine hydrolock on me few days ago. I did a leak down test on the cylinders and while blowing air on number 4 i can hear air coming from carburetor opening. From cylinder 3 and 2 i can hear the air from the opening where you add the oil on engine...
  8. C

    2000 Marine 200hp EFI Dying from Foward to Neutral

    Hello guys I'm having a hard time getting this outboard engine running smooth. After seating for long time i cleaned the whole fuel system completely and i got it running and idling fine, but when i put it on forward then back to neutral it dies same if i put in on reverse then back down to neutral.
  9. C

    2000 Marine 200hp 2 stroke EFI 2.5L V6 Fuel system Issue

    I figure out why the boat was not turning on. i disconnected the fuel line and try to start it and it start. i guess there is excessive gas going into the cylinders i have a EFI system not carburetors so is there a place where i could regulate how much gas, oil and air goes into the engine?
View older results
Top