Search results

  1. 88 Capri (2022 SOTY)

    88 Capri Restoration (Splashed 08/2022)

    I finally had some time to work on her and feel good about it! Motor is in and aligned with cables all connected and adjusted along with getting the outdrive on. I also installed a new bilge pump. I plan on purging the trim system tomorrow or Saturday then will work on getting it running at...
  2. 88 Capri (2022 SOTY)

    88 Capri Restoration (Splashed 08/2022)

    I am pleasantly surprised that I had no water mixed with the oil in the lower unit as well as not having alot of debris on the magnetic plug. I wasn't in a hurry to drain the oil so I made a little dripper so the oil didn't run all the way down.
  3. 88 Capri (2022 SOTY)

    88 Capri Restoration (Splashed 08/2022)

    Alignment tool came today but I must say the videos I have watched just don't tell you the chunk of steel you're ordering! Oh and that lower unit is never going in the basement again, I forgot how heavy it was lol
  4. 88 Capri (2022 SOTY)

    88 Capri Restoration (Splashed 08/2022)

    Proof lol! Lots of adjustments to come..... I'm tired time to relax 😌
  5. 88 Capri (2022 SOTY)

    88 Capri Restoration (Splashed 08/2022)

    If it's black does it mean mercruiser? 🤣
  6. 88 Capri (2022 SOTY)

    88 Capri Restoration (Splashed 08/2022)

    Just a little update. Transom and transom plate installed, steering connected along with the exhaust but I still need to bleed the trim system. I am hoping to get the engine set in today also, hopefully I'll have proof of that 😊
  7. 88 Capri (2022 SOTY)

    88 Capri Restoration (Splashed 08/2022)

    Good morning Express 😊 Thank you for the compliment. I used white gelcoat and not marine paint. I put two coats of the unwaxed down first and then one coat of the air dry gelcoat so it would cure and harden. I must say it is extremely tough and smooth so walking on it while wet is tricky but I...
  8. 88 Capri (2022 SOTY)

    88 Capri Restoration (Splashed 08/2022)

    I took a picture of the engine and trim pump original bolts which were obviously steel against the new stainless replacements. Just a comparison for anyone with an old boat that may want to check these items to see if theye may be compromised and it will tell you if you might have moisture in...
  9. 88 Capri (2022 SOTY)

    88 Capri Restoration (Splashed 08/2022)

    Hi all, Bonding cable installed as it should be with new anode. I have installed all new steering seals, bushings and shift cable which will be adjusted once engine is installed this week. I have everything here or on order to get everything installed, I even bought a new float for the fuel...
  10. 88 Capri (2022 SOTY)

    Trim Bonding Cable

    Thanks Kenny for the response. The OMC manual I have shows a couple different examples which were vague especially in the last picture. Looks like it goes under the trim cylinder cover (PO had it that way,) which didn't make sense to me till I found the other diagram which shows them under the...
  11. 88 Capri (2022 SOTY)

    Trim Bonding Cable

    My apologies I have a 2.3 liter but I believe are the same up to the 5.0 or 5.7.
  12. 88 Capri (2022 SOTY)

    Trim Bonding Cable

    I'm about ready to install my transom assembly and wanted to ask if someone would be so kind as to take pictures of theirs so I can make the connections correctly. Thanks 😊
  13. 88 Capri (2022 SOTY)

    2.3 cobra shift problem now...?

    From my work on my 2.3 the shifting issue won't affect your impellers because the impeller spins wherever the engine is running and is not connected to your shifting mechanism. What cable adapters are you referring to? The picture I posted shows where your shift cable adjuster is (right) and...
  14. 88 Capri (2022 SOTY)

    Help.......

    Hi there 😊 I'm not overly familiar with boats of that vintage bit is there any HIN numbers stamped in the hull anywhere or tags affixed? On my 88 the numbers are stamped starboard side of the stern on the outside. Maybe Search the internet for pictures of what he said it is and go from there but...
  15. 88 Capri (2022 SOTY)

    88 Capri Restoration (Splashed 08/2022)

    Good morning, I attached the transom seal after a failed attempt earlier. Because it isn't molded to the shape of the Seal area I put some sealant every couple of inches and secured it with painters tape to hold it in place while the sealant sets up enough to get it installed, I've had it...
  16. 88 Capri (2022 SOTY)

    88 Capri Restoration (Splashed 08/2022)

    I wanted to pass along some information I learned today as far as the piece pictured. This is located on the inside below the transom plate and if it appears bent or deformed in any way ( especially by the bolt holes) it's a sign of a rotted transom. OMC and Volvo/Penta have the but unsure of...
  17. 88 Capri (2022 SOTY)

    88 Capri Restoration (Splashed 08/2022)

    I'm starting the cleanup, painting of the outdrive components. The transom plate came out nice and will work on the upper drive unit tomorrow. If I can paint enough of everything I'll pretend I have an alpha unit 🤣
  18. 88 Capri (2022 SOTY)

    88 Capri Restoration (Splashed 08/2022)

    I cleaned the front upholstery and middle seats and came out better than expected. I have to work on the seat fitment with Bayliners awesome setup....um no. Gave her a complete bath also and even the blue came out a bit. I know may be a bit early with still needing to install the mechanicals...
  19. 88 Capri (2022 SOTY)

    88 Capri Restoration (Splashed 08/2022)

    It's a small step but reassembly is starting.
  20. 88 Capri (2022 SOTY)

    88 Capri Restoration (Splashed 08/2022)

    The gelcoat is finished. I touched everything under the dash that was wood related. Damn it's brilliant lol.
Top