Search results

  1. JimS123

    TeeNee

    I realize they went out of business quite some time ago, but the lack of any info on the net is still surprising since they were around so long. Anybody have any idea when they closed their doors and why, or if they were bought out?
  2. JimS123

    Eagle Trailer w/Grease fittings on Hub Covers

    Its a OEM Eagle trailer with zircs on the hub covers. Not Bearing Buddies, and has no spring plate or movable blue indicators. How do you know when to stop pumping grease?
  3. JimS123

    Pertronics Electronic Ignition on 3.0 L 140

    Anybody ever installed one of these units? Anybody ever have one fail and need to replace it? Anybody ever replace theirs just for preventative maintenance?
  4. JimS123

    Minn Kota - water in bottom end

    Just installed a new Traxxis 40 and got to use it a few times. Never had an electric before. Couldn't be happier with the performance. When I'm done, naturally I tilt it up then start the main engine on. When I get home I lower the Traxxis into the running position and some water always...
  5. JimS123

    Traxxis 40 Transom mount Question

    Never had an electric motor before. Bought the subject one based on advertising. Just got to try it out yesterday. Its on a 14' Starcraft Seafarer FLSS - total weight with me in the 800 pound ballpark. At 25% it pushes the boat 0.7 mph and at 100% 2.3 mph. That's perfect for what I want it...
  6. JimS123

    Engine Decarbonizing

    After reading all these oil threads, I got to wondering whether I have been lax in maintenance all these years. Never decarbonized one yet. The motor I'm concerned about is a 1984 Evinrude 9.9 sitting on an OMC bracket on a 19' bowrider. It has a sailboat prop to keep the rpms higher. I did...
  7. JimS123

    Oh No - Not Another Hydrofoil Thread

    All the boats are water ready but the weather is not cooperating. On this rainy day I was reading through my stack of old magazines and came across a 1989 article on Hydrofoils. I found it interesting reading so I thought I would share. Trailer Boats Magazine used to be the best! Their tests...
  8. JimS123

    2010 15hp E-Tec....They must be kidding!

    Just read the specs in a magazine. Its based on the 25 hp block and weighs in at 177 pounds. I can't imagine who would want to buy one of these. And its a 2-stroke to boot. I replaced the 18 on my fishing boat last year with a Yami 25 at 105 lbs. I didnt want to wait for the E-tec because...
  9. JimS123

    Yamaha 25 HP 2-stroke hard starting

    The motor is a 2007 model. I also own Evinrudes that are 1988 as far back as 1953 and all start 2nd pull. I asked this question 2 years ago but didn't really get a good answer. The motor takes 8 or 9 pulls to start. I asked my local Yami dealer mechanic and he said check the choke. I pulled...
  10. JimS123

    Winterize Live Well

    I have a 2009 Starcraft Seafarer with a live well. The discharge hose seems to be self-draining, but is the fill hose? The pickup is on the outside of the transom, with the pump mounted right inside. After the pump the hose has a gooseneck (loop) before going forward. Al the hoses are...
  11. JimS123

    Mercruiser V-6 Winterizing

    We live in a northern climate where anti-freeze is a must. Our old boat was a Mercruiser 3.0 liter 140 that required that you pull three brass plugs to drain, then pull the thermostat and fill the block and manifold with anti-freeze. Lately we have been hooking up a plastic tank and runnning 5...
  12. JimS123

    Trolling Motor Depth

    For a transom mounted electic motor, how deep should it be set? I would think the prop should just be below the boat. Is that about right?
  13. JimS123

    OK Newbie Got it narrowed down...Traxxis vs. Varimax

    Please see my last post. Thanks to all who replied. This is for trolling only. A Yami 25 is the main engine. Ok, I'll upgrade to a group 24 battery. Now.....its between a MK Traxxis 40 (36") and a MG Varimax V40 (30"). I like the compactness of the Varimax (I don't really need the extra...
  14. JimS123

    Newbie ???s about Trolling Motors

    I've been a boater for 50 years but never had an electric. I would like to put one on my 14' fishing boat and have been doing some reading. Here are my questions: 1. Opinions - Minn Kota or Motorguide - which is better as far as reliability and service life? 2. How large a battery is...
  15. JimS123

    Leaking Rear Seals

    I have 3 boat trailers. Two singles and a tandem. Fresh water only. The singles had the dust caps replaced with Bearing Buddies when new before they even hit the water. When the tandem was 10 years old the bearings were repacked, new rear seals put in and BB installed. All 8 wheels have a...
  16. JimS123

    1999 Force 120 Power Loss and Stalling

    The motor is on a 27' Party Barge Pontoon. It was properly winterized last fall and just commissioned for the year today. It was quite hard to get started, which is not that unusual after sitting all winter. But when we took her out she seemed to have a power problem, since we could not get...
  17. JimS123

    88 Octane?

    I am running a one-owner 1984 Mercruiser 3.0 L 140 HP engine in my Stingray bowrider. The engine has run flawlessly from day one and I intend to keep it that way. I have always been meticulous about maintenance. It now has about 1200 hours. About 10 years ago I upgraded to Pertronics...
  18. JimS123

    Retractable Outboard Motor Bracket

    When I bought my boat new in 1984 I immediately equipped it with a new 9.9 Evinrude 2-stroke kicker. I used an OMC bracket (the one with the gas powered lift cylinder) and it has performed flawlesly until last year. The cylinder has lost its gas and a few of the holes in the aluminum mechanism...
  19. JimS123

    Pre-Made Boat Cover

    Looking for a new cover for my Starcraft SF14. In the past I have had only soso success with buying mail order covers. None fit too well. Anybody recommend a supplier and manufacturer?
  20. JimS123

    Signaltone Electric Trumpet Horns

    I picked up a set of horns cheep at a garage sale and they don't work. I diassembled them and the internals all look good. The seal was tight and didn't look like any water intrusion. Looking inside, I'm really not sure how they work. THere is a component in the center that looks like an...
Top