Search results

  1. Texasmark

    2004 Mercury 115 2 stroke - oil injection block off plate

    I have done that to two engines, 90 and 115 Mercs. All I did was to unscrew the oil pump and remove 1 of its hoses (so that I could pull it back), pull it back, remove the gear/drive shaft...easily removed just grab it and pull) and put things back. left oil in the tank as it wasn't bothering...
  2. Texasmark

    Best Outboard Motor Brands for Reliability and Long-Term Use

    Bought a new Johnson 125 HP in 1972 and kept it for 7 years. Kids grew up, no more Sunday outings after church, so I sold the boat. During that time I never did anything, anything, to that engine but put premix in the tank and ran it. Sold it to a friend and he used it for who knows how long...
  3. Texasmark

    Drilling vent holes in a prop

    I started small, forget the dimensions...5/16 maybe and tested for desired effect. Don't remember but I hit the sweet spot the first or second diameter guess. From earlier in this post: "Some props, like the Merc. Laser II have plugs of different diameters (available) and one that closes off...
  4. Texasmark

    Drilling vent holes in a prop

    Most of not all of my Turning Point Hustler aluminum props for my 90 and 115 engines come ported from the factory....they are designed to mimic SS prop amenities except for the metal and it is a special, high density, aluminum. I get mine right here.
  5. Texasmark

    White residue on prop shaft, thrust washer, inside prop etc.

    Lubriplate brand grease (in most auto stores) is commonly used in marine environments as it stays put and stays greasy in marine environments.....its white.
  6. Texasmark

    Flywheel magnets

    If you don't get any positive replies and a dealer can't help you and the magnets are cheap, buy both and test till you get the right answer.
  7. Texasmark

    Drilling vent holes in a prop

    Years ago I found a diagram for where to put the holes and how large a diameter. As I recall I found it on here and it was OMC oriented but the process is the same. Using a HF drill press and coated drill bit with a premium cutting oil, I bored out one of my SS props. Took awhile but I...
  8. Texasmark

    Water flow out powerhead

    125F and 142F thermostat opening temps are in my realm of experience. Doesn't take much to pop the TS cover, remove the TS and do a quick check of the validity of your assumption and then put the stat and cover back in/on.
  9. Texasmark

    Boat opinions

    Walking, looking, and asking owner's questions.....right on!
  10. Texasmark

    1992 Mercury 100 HP 2 Stroke Starving?

    Another thing that surely should be considered is the fuel filter getting clogged with old hose bits and pieces. With the higher speeds requiring a higher fuel consumption rate, a partially blocked fuel filter could be your problem. I don't know if your engine has a fuel filter or not....my 90...
  11. Texasmark

    NEED PROP ADVICE: '78 Johnson115 2stroke/ '82 Ranger 330V

    My Merc. manual said to expect problems if compression is less than 120 PSI. Looks like you fail the test.
  12. Texasmark

    1971 Tri-Sonic Riviera (any other ones out there)?

    I "lusted in my heart" (Jimmy Carter) for one of those "Trihedral Hull" babies back in the early 1970's but raising 4 kids came first. We had our water fun but didn't have the rough water capabilities that hull had.
  13. Texasmark

    Making a 16' Aluminum fish boat TOO LIGHT.

    Try a Crestliner......their hull is a game changer......was for me!
  14. Texasmark

    Mercury Oil Injection

    Foot note: I made a note adjacent to the fuel filler to add oil to the gas for premix.
  15. Texasmark

    Mercury Oil Injection

    I just pulled out that drive shaft of which you refer and did nothing else. Since the pumping device in the pump was pretty well sealed to ensure the correct oil flow during normal operation, apparently if any oil leaked by it wasn't much. Left what oil was in the tank when I made the change...
  16. Texasmark

    2002 Mercury 115 ELPTO 2 Stroke electrical output

    When I bought my first new boat it only had one battery. I wanted and added a trolling motor. One day while fishing I drained the battery to the point where it wouldn't roll the 85 HP Chrysler triple. In the underside of the canopy/hood whatever, was a plastic pouch with a cranking rope. I...
  17. Texasmark

    2002 Mercury 115 ELPTO 2 Stroke electrical output

    I say red because that's how the service manual addresses the different amperages of generating devices....by color.
  18. Texasmark

    2002 Mercury 115 ELPTO 2 Stroke electrical output

    If the stator is red its 16 ampere rated and that is at max RPM. That is the max rating and I don't remember the output voltage when it supplies that current. Max voltage is regulated at 14.5V max under certain amperage conditions....like topping off a near fully charged battery with trickle...
  19. Texasmark

    Looking for my first boat and dwelling too much on the I/O vs Outboard question...

    I fished once with a friend with a 50's era LS cabin (shell). It was a 20' with a 70 HP Merc I6 outboard, which moved it right along, just right for that boat and its use. You're getting on down the line on aluminum hulls and age. I would think that you will be inundated with leaking rivets...
  20. Texasmark

    Looking for my first boat and dwelling too much on the I/O vs Outboard question...

    I've had both brands and liked both. The hulls are basically sound. Only probem is the deck (floor) and the transom wood. The Crestliner transom is highly reinforced aluminum framing, and I found that mild water absorption in the 2002 I bought was not a safety hazard. It had a soft spot near...
Top