Search results

  1. Scott Danforth

    Coil

    get a dwell meter, make sure your dwell is running ~ 32 degrees. then make sure the timing is correct. I believe it was 4 degrees BTDC at idle. however you may want to check that.
  2. Scott Danforth

    Coil

    so you have points, when was the last time you verified dwell with a meter?
  3. Scott Danforth

    Planning out installing NMEA 2k

    do you have a fuel flow meter, or are you relying on the pseudo calculated information from the merc ECM?
  4. Scott Danforth

    Coil

    agreed, 99.99999% chance its NOT the coil follow the troubleshooting tree for the thunderbolt ignition, specifically for the hall-effect trigger in the distributor, called a "sensor" in the parts diagrams. my guess is your boat has the older 2-wire sensor in the distributor vs the newer 3-wire.
  5. Scott Danforth

    1964 14' Mirrocraft Family Runabout Upholstery Color

    regarding the boat, it reminds me of the 1974 Mirrocraft ski n' troll that I grew up on . however it was yellow and white. seats were creme-ish white and brown. the ski n' troll was rated at 45hp, however with the Merc 50 on back, it would do a good 33-35mph with proper trim and weight...
  6. Scott Danforth

    1964 14' Mirrocraft Family Runabout Upholstery Color

    It was only original once The original style vinyl is no longer available. So restore it any way you want
  7. Scott Danforth

    2002 240 Four Winns Volvo 5.7 Penta winterization process

    There is a winterizing sticky. https://forums.iboats.com/threads/winterizing-inboard-and-i-o.770207/
  8. Scott Danforth

    Changing the U-Joint on an OMC Cobra Out Drive, OD

    No
  9. Scott Danforth

    bonding keep to hull

    most likely it is what ever resin the boat company used. most likely poly
  10. Scott Danforth

    Looking to repair/replace or fix some vinyl cushion/panels in my Thundercraft Capri 87 where I can get an estimate near Philadelphia?

    at a minimum start with link 14 https://forums.iboats.com/threads/how-tos-and-other-great-information.283508/
  11. Scott Danforth

    Mercury 2 stroke 4 hp

    no, repair manuals are copyrighted. any "free" manual will be an illegal copy you can obtain the service manual from https://publications.brunswick.com/ or buy a used one off ebay
  12. Scott Danforth

    Strip gears off propshaft

    did you get a factory service manual? if not, start here. https://publications.brunswick.com/
  13. Scott Danforth

    Beeping Issue with Switch Assembly - (87-12886A5)

    welcome aboard. you need to remove the oil tank, clean it out and see if the sensor is stuck and needs cleaning, or needs replacing.
  14. Scott Danforth

    Changing the U-Joint on an OMC Cobra Out Drive, OD

    Item 29 in the exploded view you posted in thread #1. you will also need new crush sleeve for between the two input shaft bearings.
  15. Scott Danforth

    Looking to repair/replace or fix some vinyl cushion/panels in my Thundercraft Capri 87 where I can get an estimate near Philadelphia?

    First, welcome aboard Since your fiberglass boat has a soft floor, the seats are the least of the issues. The last thing to rot on a fiberglass boat is the floor, your transom and stringers have long ago rotted. Remove the engine, de-rig the boat, then do a complete hull restoration by...
  16. Scott Danforth

    Engine number

    Should be engine serial number tag just above atarter
  17. Scott Danforth

    Looking for a very unique head unit

    Same I am finding. However after getting lost in the south west because there are no cell towers I vowed to never rely on cell based anything. Looking like it may be a dedicated Garmin screen with a network link to a hidden audio head unit. Have more tech questions to the OEMs Tried the 5-10...
  18. Scott Danforth

    Motor selection

    every inflatable boat that takes a motor has a rating for the motor. be at or below the rating for the boat you bought
  19. Scott Danforth

    Fourwinns 378 Aft couch control

    welcome aboard. have you reached out to fourwinns?
  20. Scott Danforth

    Gen 2 water and oil hose

    this is where you are wrong. buy the OEM molded hose.
Top