Search results

  1. redneck joe

    Great loop speed record attempt

    Here is his fb page. Mark as a fav if you want to see his updates prioritized https://www.facebook.com/rwyouens
  2. redneck joe

    82 Starcraft MR 180 floor, slight refit and leaks

    I just was studying on that. If I move the starboard to port side and vice versa, cut off the front of them leaving an inch or so to snap on a canvas cover. That gives me the splashwell support, forward bilge access and side coverage to keep crap from falling in the bilge. Then I can build...
  3. redneck joe

    Trim pump question

    Slowly drops when on trailer, quickly drops when in use. Manual states to check fill i need to loosen vent screw specifically two turns then the end of the instruction tells me to leave screw open. Why would I have to loosen if it is already loosened?
  4. redneck joe

    82 Starcraft MR 180 floor, slight refit and leaks

    One had foam, one was empty. All original rivets. With my trim pump down there i really do not have space to put the battery there. It was sitting on the floor just north of the knee brace. My plan is to make a storage box in front of the splashwell at that same height so that can add...
  5. redneck joe

    Nobody fishing?

    https://wvdnr.gov/gov-justice-announces-two-anglers-catch-record-black-crappies-on-same-day-at-woodrum-lake/
  6. redneck joe

    Wanted To Share!

    I've been thinking about that as a retirement project when I get there. Cool boat. Do you have to register if electric motor?
  7. redneck joe

    1971 Tri-Sonic Riviera (any other ones out there)?

    Welcome to the forum. Any sofy spots on the floors?
  8. redneck joe

    StarCraft 181 SS conversion

    Welcome to the forum. Sounds fun. I'm not help but several here have done conversions and they will drop in and help
  9. redneck joe

    1989 Sea Ray 200 BR Interior rebuild and new layout

    I felt like doing that a few times over the years...
  10. redneck joe

    Great loop speed record attempt

  11. redneck joe

    Mercury Oil Injection

    I don't trust oil injection. Don't know anything about the alarm but I've had two with that and always premix.
  12. redneck joe

    82 Starcraft MR 180 floor, slight refit and leaks

    Fun story.... I got the knicks yesterday so took a few hours for the real fun to kick in. So this morning I have a pair of boots that have the soles turning loose so of course I popped a tube of automotive windshield urethane to glue them back together. Of course I didn't use gloves so when...
  13. redneck joe

    82 Starcraft MR 180 floor, slight refit and leaks

    Last section of flooring in, fuel tank valve mounted. Side panels in with foam. Rod holders in. Forgot to thank @MNhunter1 for gifting me the rodholders me made but he did not use. So this boat has two panels under the splashwell, one each side. In the below pic i have put one close to...
  14. redneck joe

    82 Starcraft MR 180 floor, slight refit and leaks

    Been a crazy week. Family from Denmark and Tokyo flew in, three separate 'family' groups in from Mo, another from AL. 14 people first night, kicked one group of three out the second night. 32 people for the day on 4th. I slept almost an entire day afterwards. The two international families...
  15. redneck joe

    Dopamine

    While i do buy a lot of crap, I hugely enjoy the hunt of being cheap to the point where it can irritate my wife. Both boys were raised my Mrs redneck when she was going thru some troubled times and always knew that. Even after she and I got together and we're making obama rich money for...
  16. redneck joe

    Throttle Only Button

    Ebay?
  17. redneck joe

    Starting a 1974 Tri-Hull Restoration, it's a Stryker Mark IV model. Need help with any information or an owners manual.

    Sounds like you are gtg. I am just about done with my aluminum restoration and I'm old, not trying to pick up any chicks, don't care what it looks like so didn't not work on the pretty but i know for sure it is way more solid now and will outlast me and then whichever boy gets it should be gtg...
  18. redneck joe

    1979 80 hp Mercury

    Yes, you are dirtying the lake. A two stroke needs (roughly) 50:1 mix to run at WOT. At idle about 100:1. So oil not burnt in the combustion process is coming out the exhaust.
  19. redneck joe

    Lengthening a boat trailer

    Why are you adding, how much are you adding, what is current rig, etc. Make sure you watch this and very much respect the physics behind it. https://forums.iboats.com/threads/weight-distribution-101.683625/
  20. redneck joe

    Starting a 1974 Tri-Hull Restoration, it's a Stryker Mark IV model. Need help with any information or an owners manual.

    I would be think the already done below deck stuff would be sus. And unless the fiberglass is sanded and cleaned to perfection the flex seal will not adhere and if you think it needs it that would tend to tell me the previous work is even more sus. All that said, de capping is the best first...
View older results
Top