Search results

  1. B

    Starter fluid everytime....

    Some motors like a bit of throttle. Some don't.
  2. B

    Engine oil alarm, not priming

    He says the pump is running but not pumping oil to the filter. Could be the motor is fine but the pump part is defective.
  3. B

    Engine oil alarm, not priming

    You need to know what is causing the alarm. Not just think. Guess really. If you powered the remote tank pump motor directly (and correctly) and it ran, but it would not pump oil, then the pump is inoperative. However, with the key on and the toggle switch pressed, the pump should also have...
  4. B

    Starter fluid everytime....

    A cold motor needs a bit of extra gasoline to help get it going. Which is what a choke does. What you are doing with starting fluid. As asked, is your choke system functioning?
  5. B

    Mercury 2.2 hp ignition coil

    Probably not.
  6. B

    Engine oil alarm, not priming

    At how many forums do you intend to ask your questions?
  7. B

    need help finding part 94 mercury 40hp carb part

    What is its part number? Or the serial number of the motor?
  8. B

    How to fill a totally empty tilt/trim system 1998 Yamaha 115

    Lift the motor all the up manually. Using the relief valve. Open the valve. Pull the motor all the way up. Use the locking device. Close the valve. Add fluid to the reservoir. Leave the motor locked up mechanically. You might try disconnecting the tilt piston connection from the motor. Push...
  9. B

    How to fill a totally empty tilt/trim system 1998 Yamaha 115

    Fill the reservoir as best you can. Put the cap on. Run the motor down and then back up. You might need to give it a helping hand. When it is back up remove the cap. Add fluid if needed. Repeat until such time as the reservoir is full and will take no more fluid.
  10. B

    Spirit 25hp

    This is a Yamaha/Suzuki forum. Are you thinking that the motor was made by Yamaha or by Suzuki?
  11. B

    Spirit 25hp

    In what country? A Yamaha USA dealer won't be able to find anything with that kind of an identity.
  12. B

    2001 40ELPT 4S issue

    What is the motor serial number?
  13. B

    2006 Yamaha 250 VMAX SHO

    Do I presume correctly that you have a Command Link tachometer? The kind with bars that show some indication of temperature range?
  14. B

    2006 Yamaha 250 VMAX SHO

    Keep running that motor when the alarm is trying to tell you to turn it off is a terrible idea. Hopefully, you have not damaged the motor. You cannot bypass the main motor mounted oil tank on a VMAX HPDI model if this is what you have. Well you can but it won't last long. Is the model of the...
  15. B

    Broke a bolt on my tilt/trim overflow tank

    Many have had that problem. I would take the unit to a good machine shop and have them extract the broken bolt.
  16. B

    yamaha f150 running problem

    When the motor starts to bog down mist some gasoline into the air intake. See if it picks and runs better.
  17. B

    2005 Yamaha F115 command link/nmea2000 compatibility

    If you find the bright white Command Link connector you might be able to get some Command Link data from the -21 ECU. But it won't have the capability that the -40 ECU offers.
  18. B

    2005 Yamaha F115 command link/nmea2000 compatibility

    The -40 ECU is the one with Command Link capability. The ivory connector shown is for connection to conventional Yamaha gauges. The Command Link connector is bright white. Has a cap on it. Four pin connector with but two wires. One blue. One white.
Top