Search results

  1. alldodge

    Chrysler outboard 130 hp fuel pump

    Talk about timing. I just remembered to go to the shop and take pics and just returned with them My 140 has just the single hose going to the carbs 1st Pic 140HP 2nd Pic 120HP 3rd Pic 125HP
  2. alldodge

    Oil pressure problems

    Pretty much stock HP range With a hp pump its probably increasing the heat because the pump is generating heat because of the standard clearances. I'm thinking it could use a oil cooler or if it has one a larger one. Most likely if you had a oil temp gauge it would be over 300* and is...
  3. alldodge

    Oil pressure problems

    Who ever rebuilt the motor must have put a high pressure pump in. Nothing wrong with a high pressure pump but if used the bearing clearances need to be a bit different. How much HP was the motor said to have, stock or higher? Do you know what oil was used?
  4. alldodge

    350 Mag Mpi hard to start when warm or hot

    Yes, this should have been in first post
  5. alldodge

    Chap Quality Control is gone

    Nothing can be done, have told the Dealer and it's not their fault, as before just info for those that may be looking
  6. alldodge

    Chap Quality Control is gone

    FYI for anyone looking at Chap Have a 2023 Chap 280 OSX and the boat looks "great" but that is only skin deep. Their are numerous things that just are not done correctly, and even missing. Loose and missing screws. Stacks of washers used to hold seats up to proper level. Places were the...
  7. alldodge

    Chrysler outboard 130 hp fuel pump

    Unable to really see the hose routing but will have a look at my 3 motors to see if one of them resembles your connections
  8. alldodge

    Quicksilver Commander 3000 upgrade

    Don't fully understand what the comments are saying. My take away is things have changed and instead of a 3 wire control there is a 4 wire connector. This is why I'm suggesting to contact Merc Tech to verify what you want and what to get
  9. alldodge

    Air conditioner

    Changed sump to AC unit pump assuming, your talking about the Air Conditioner as title states. If so , Yes the AC pump cycles ON/OFF as the Air Conditioner calls for cool
  10. alldodge

    Quicksilver Commander 3000 upgrade

    You would need to change some things, doesn't appear to be direct swap Suggest contacting Merc Tech support and ask them for advise if another here doesn't know 920-929-5200
  11. alldodge

    350 Mag Mpi hard to start when warm or hot

    What is the pressure when cranking and when running? Opening throttle 30 to 50% increases the amount of air but does not shut off injectors. Opening to WOT shuts off the injectors which is flood mode Pressure is to high or something is keeping injectors turned ON
  12. alldodge

    Bayliner Capri 2150 resurrection.

    Always lots of work but comes out so nice when done.
  13. alldodge

    Dean's List gets another motor

    Got the prop off but not able to get the shaft to separate from the transmission collar. Ordered another puller, hope that gets it done
  14. alldodge

    Lost key

    Look on the lock face for a number if its something like 79-# should be able to find one for less than $20 Buy a new key switch for around $45
  15. alldodge

    350 MAG no hot start

    First pic is the IAC muffler, while a clean one is better, all it does is keep the sucking sound lowered The second pic the the exhaust manifold check valve. It can get hotter with the motor running, and the check valve part is only used to drain Mans during winterization
  16. alldodge

    60 ELPT BF Falling Off at High End and Leaking Fuel from the Vapor Separator

    No expert on your motor, but leaking fuel from the top of the VST would mean the tank is over filling. That would be the overflow and maybe the float item 32 and needle valve item 24 is the issue https://www.mercruiserparts.com/bam/subassembly/28107/13478/115
  17. alldodge

    5.0L MPI low rpm at WOT

    Thanks for the update, should help others
  18. alldodge

    350 MAG no hot start

    Hey @Fun Times he edited his post and posted SN Measure fuel pressure at the rail item 18 https://www.mercruiserparts.com/bam/subassembly/31749/11652/90
  19. alldodge

    Carbureted 5.7 merc, no fire

    Your not getting spark It's not timing, if it was off it would fire or back fire but either way their would be some kind of combustion Try a cheap spark gap tester and/or run through this test
  20. alldodge

    Upper Alpha one Gen 2 Replacement

    Merc hasn't changed the coupler splines from Gen 1 thru Gen 2. The shaft is a bit larger and uses a O ring to make a better contact with the gimbal bearing. Bearings also have not changed other then greasable and sealed My guess is the motor needs to be aligned. Do you have a alignment bar...
Top