Search results

  1. R

    9.8 110 mercury wont throttle up anymore

    Motor may have overheated.----Many folks just do not know how critical it is to maintain these motors.-----There is nothing that warns you in case of overheat.----The motor runs until major damage is done.----Very simple to trouble shoot this motor.----Good luck with it.
  2. R

    9.8 110 mercury wont throttle up anymore

    Has a new water pump impeller been installed every 3 years ?---Check spark.----Might be running on 1 cylinder.-----If it has a plastic piece on top of carburetor , Is it cracked / broken ?-----Post the results of a compression test.
  3. R

    1971 Johnson 25hp Outboard - 25R71S

    Nope.----You need a puller with 3 bolts ( 1/4-20 ) to get the flywheel off.-----
  4. R

    How to disable quick start on 96 Johnson 150

    It is a 2 stroke and not a 4 stroke automotive engine.----You have to set aside automotive thinking.----Idle RPM is controlled with timing retard.----Throttle plate has calibrated opening because it needs to let a certain amount of fuel in.----That fuel has the oil to keep engine...
  5. R

    1983 7,5hp evinrude wont start

    Switch plug wires.
  6. R

    What engine do I have?

    Correct ,1980 model.
  7. R

    1971 Johnson 25hp Outboard - 25R71S

    Find the 2 small black wires coming from under the magneto.----They should not be connected.-----Remove flywheel and inspect coils.
  8. R

    What do these knobs do?

    ???-----Not much different than the tap in the kitchen sink.----But good luck with it.----Maybe read a book on how a simple carburetor works.
  9. R

    Bought my first boat to cut, gut and rebuild from bow to stern, including engine. Killed my back and suffered the wrath of the fiberglass demons

    Your location ?
  10. R

    What do these knobs do?

    The high speed is adjusted with throttle wide open with boat in the lake.----Adjust for best speed.--Then slow the boat down.-----Then adjust slow speed mixture for smoothest operation and smooth acceleration.
  11. R

    93 90hp lower engine cover

    And step #1 on a motor like that is a compression test.----For future reference.-----Post the actual values you get.
  12. R

    Bought my first boat to cut, gut and rebuild from bow to stern, including engine. Killed my back and suffered the wrath of the fiberglass demons

    Best concentrate on the boat repair.----Motors are easy to find / repair. As per post # 87 and #94 as well , in this saga.
  13. R

    93 90hp lower engine cover

    Power head has to come off.----Your location ?----Canada----evinrudeparts.ca----might help.
  14. R

    No spark on Merc 85hp

    Belt timing correct if it has the distributor ?
  15. R

    Smoke, high temps and louder than normal

    Water pump impellers need to be replaced about every 5 years.------Best investment you can make and easy to do.
  16. R

    Bought my first boat to cut, gut and rebuild from bow to stern, including engine. Killed my back and suffered the wrath of the fiberglass demons

    Motor must be taken apart for a complete evaluation.----Do not forget taking lower unit apart as well.
  17. R

    1989 evenrude tracker 40 overheating

    Water that comes out the tell tale does not circulate through the block.------Could be an internal blockage.-----Any mud wasps in your area?
  18. R

    1989 evenrude tracker 40 overheating

    Complete water pump kit ?-----Did he replace the seal at the outlet of the pump?-----Needs to be there since it does not have a water tube.----Overheating with boat in the lake?---On muffs ?----Or in a tub of water ?----Running with VRO in service ? ----Mixing oil at 50:1 in the tank ?
  19. R

    2013 25 hp Mercury outboard

    In forward gear you can turn the prop clockwise but not counterclockwise.----And that sir is normal!
  20. R

    2013 25 hp Mercury outboard

    Prop can spin one way when in forward ??---Or are you saying the boat moves in forward but does not shift into reverse.------Pull cord might not come out if motor is in gear.----Electric start might not work if motor is in gear.-----Did you get a manual on how to operate this motor?----To your...
View older results
Top