Search results

  1. R

    Johnson 48 spl fuse location

    Yes there is a fuse in the wiring harness.----Look for it near the solenoid.----A 20 amp about 5/8" long.
  2. R

    Is my motor toast?

    Looks like something loose inside the motor and popped a hole in the crankcase.----Your location in Canada ?
  3. R

    Verify model/serial number / Evinrude 70

    Correct it is a 76 model.------There really is no difference between a 76 model and an 81 model.-----Easy motors to work on.-----First thing is to post actual compression test values here.
  4. R

    Changing V4 crossflow from pre-mix air cleaner fuel pump mount to pulse pump

    The simple pump mounts directly on the intake manifold.---Mounts over the pulse port.----One hose for fuel in and a hose for fuel out.-----Remove pulse limiter and plug that port.----Re-arrange hoses as needed.
  5. R

    1986 Evinrude 110 fuel issue?

    Boat should be running about 50 MPH.-----Sounds like it is running on 3 of 4 cylinders.
  6. R

    1970 evinrude 115 - cdi pulse pack shortens out starter?

    Take starter apart for inspection.-----Do ohm checks.
  7. R

    Repowering from 1996 112 evinrude to 1995 115hp evinrude help

    Remove one motor and install the other.-----No need to change controls.----Install new water pump impeller.----Change gear oil.-----Commision the oil injection system ??----Test the oil injection system.----Perform compression test and record numbers for future reference.
  8. R

    1986 Evinrude 110 fuel issue?

    Post the actual values after doing a compression test.---Post them here.
  9. R

    Low RPM on a new outboard...All suggestions welcome

    Was the correct propeller installed?------
  10. R

    1976 mercury 1150 115hp runs on muffs but not in lake

    Open low speed fuel mixture screws 1/8th turn at a time and test run.
  11. R

    Fiberglass resin question

    I use West System epoxy.---More beer tokens I know.------I can no longer tolerate the smell of the polyester stuff.
  12. R

    Is my engine mounted low enough?

    Strange how people come looking for suggestions and then mock the people offering the suggestions.----I think adding 5" (12.5 cm ) to the motor is a top notch solution.----Sorry if it does not fit your budget.-----Not going to get much more help on this forum I think !!
  13. R

    115 Johnson v4 2000 trouble staying started oil/gas leak from exhaust

    Yes----It is always the carburetors.----Might as well rebuild them.-------Or perhaps do some easy trouble shooting first.-----This motor should at least fire , bark and roar when cranking with key pushed in , does it ???
  14. R

    Is my engine mounted low enough?

    I think you need a bigger boat.
  15. R

    Is my engine mounted low enough?

    Have you established a price for a kit ??----Why do think this suggestion is funny ??
  16. R

    1966 Johnson Motor

    Cable for the electric tilt has 3 wires.
  17. R

    Rescued 69 Evinrude Rogue with stringer need beginner tips

    Any pictures of this Buick 300 CI engine?-----A V-6 or V-8?
  18. R

    Did I Spin My Prop Hub?

    Perhaps look at what parts you marked.----I think the prop hub is spun !
  19. R

    e70elcdc 1986-1987 Turns over no spark

    No money spent to charge the battery , load test the battery.-----Take starter apart for inspection.-------Or just replace the powerpack as that fixes them 9 out of 10 times.
  20. R

    Is my engine mounted low enough?

    Get an extension kit.---Add 5" to the length of the motor
Top