Search results

  1. S

    Yamaha 225hp ox66 tilt and trim help

    Okay, not sure how to splice in but I think I have an idea. Normal things to think of are bad ground, electric motor or fuse. Because you made it run my bet you have a bad fuse somewhere. They love to hide those things so search all around the motor for some kind of fuse holder.
  2. S

    1986 4 hp Evinrude poor idle

    1st of all, I had a First of all I had a 4hp Deluxe and it had much higher compression than yours. It was used so I can't speak about what it had when new. I have also ran compression checks on many small motors that were much higher than you say. Not sure piston size means anything. Most...
  3. S

    Suzuki DF115 transom (Trim/Tilt) saver??

    Never said it was. The conversation started out that his new 2022 Suzuki didn't have anything for trailering. Then the conversation went from there. Re-read the thing and then it will make sense.
  4. S

    8MLHU limited RPM

    Agree with above. And if your using it in a test tank and trying to go WOT then that's not good. You would need a dyno.
  5. S

    Suzuki DF115 transom (Trim/Tilt) saver??

    It's a 115 Gen 1 Etec. Here is your pictures.
  6. S

    1986 4 hp Evinrude poor idle

    100 psi is not what I would call great. Usually, coughing and sneezing is a result of carburetion. Sorry, I can answer the other questions.
  7. S

    Are there only 2 grease ports on my outboard

    There should be two on the transom bracket to tilt tube. (Might be what your calling steering rod) Then there should be one on the side that greases where the motor swivels whole steering. Grease comes out the top and bottom of the midway section of the engine.
  8. S

    35 Johnson overheating

    Pricey but available.
  9. S

    Suzuki DF115 transom (Trim/Tilt) saver??

    My motor has two different things. One is a single cam for working on or to be used when mooring and a heavy duty double arm thing to be used for trailering.
  10. S

    Suzuki DF115 transom (Trim/Tilt) saver??

    Huh, imagine that.
  11. S

    9.9 Spewing Fuel

    That was Sea-Way. Under the bridge....it was a boneyard then.
  12. S

    9.9 Spewing Fuel

    Old, you talking about Jacobson's or Sea-Way?
  13. S

    35 Johnson overheating

  14. S

    Reverse gear

    Seems to be an epidemic of motors not being able to go into reverse. If you remove the shift rod can you shift it into reverse manually?
  15. S

    termostat/cooling at Johnson 90hp 1986

    Pee stream or tell tail is independent of the cooling channels and just shows your pump is working. Thermos allow water into the cooling channels to cool the engine after it starts to warm up. If channels are blocked no cooling will happen. Someone tried fixing it and gave up or something.
  16. S

    1990 48 HP SPL ,No reverse

    The adjustment is back at the motor. You have two cables, one is for throttle and one is for shifting. It might not be adjusted so that it doesn't go back far enough to make it go in reverse. You can remove it, shift it by hand, see if it works and then adjust the cable to it's proper location.
  17. S

    ‘94 150 fast strike fuel pump part

    Is your outboard running now with your bush fix?
  18. S

    1990 48 HP SPL ,No reverse

    If you have a control box it could just be out of adjustment.
  19. S

    Suzuki DF115 transom (Trim/Tilt) saver??

    Never seen that, looks interesting. My outboards had flip down brackets for trailering. What does your new motor say to do when trailering? Surprised a 2023 outboard would not address that.
  20. S

    Battery draining

    Again, and I think F_R could be right, but leaving the key on with certain ignition systems can cause a drain. You state that after fishing the battery was at 100% and then when you came back to it it was empty. What you didn't say is how long was that? Was that a day was that a week? Also, I...
Top