Search results

  1. nola mike

    I don't think the heavy stuff is gonna come for quite a while...

    The boat will live to see another weekend. The surge was still a foot or 2 from the bottom, so would have taken a good bit more to actually float it off there I think. Maybe 15 or so other boats on lifts around me, I think that jet ski was the only casualty. House damage limited to some lost...
  2. nola mike

    Mercruiser 3.0 Trouble Starting

    So you don't have any power to #5 on the female side of the plug, but do at the gauges? Find the common point of your purple wire under the helm. They daisy chain off the gauges and eventually one goes from the helm to the cannon plug in the stern. Would be strange that you had spark before...
  3. nola mike

    I don't think the heavy stuff is gonna come for quite a while...

    Yikes, we're only mid-tide. I don't think I can handle having my boat take another dunk. A little duct tape and she'll be fine One of many newly ventilated piers:
  4. nola mike

    I don't think the heavy stuff is gonna come for quite a while...

    Neighbor's jet ski 😳
  5. nola mike

    I don't think the heavy stuff is gonna come for quite a while...

    Next high tide 8p, might get a little sporty.
  6. nola mike

    Quit My Job . . .

    Mine isn't. You're doing it wrong.
  7. nola mike

    Wiring question for 4.3l Merc

    If he's got power to the alt, the problem is after the plug...
  8. nola mike

    89 Horizon 180 with stock 4.3 upgrade questions

    On behalf of everyone trying to give you good advice...I apologize. Flywheel and/or coupler may be different, rear mounts may be different, front mounts will be different...I'm sure you'll find more problems as you get into your "cheap" project. If it's me, I pull a wrecker 350 for that same $200.
  9. nola mike

    Wiring question for 4.3l Merc

    Should be a common take off point for the purple somewhere, not sure where on the TKS. You'll have to trace the alt purple back...
  10. nola mike

    2003 Mercruiser 4.3 TB-V No Spark

    This is a 3 wire hall type "pull down" sensor. ICM uses a reference voltage, and there's a signal voltage through the sensor. When the signal wire is grounded to the ICM, it thinks the switch is closed (signal voltage is pulled down from 5v-->0) Can't quite picture this, but the sensor ground...
  11. nola mike

    Wiring question for 4.3l Merc

    Yes, with ignition on. Check the purple wire at the OP switch. Should have 12v. If not, check coil (+). Should have 12v off purple wire there.
  12. nola mike

    Buying a used boat with Mercruiser 228

    I would add that I'd pop the top cover off the outdrive to get a quick look at the condition of the upper gears
  13. nola mike

    I'm stumped, overheated 4.3 MPI, water in oil, replaced heads, still water in the oil

    .005 was milled, don't think he was referring to the flatness
  14. nola mike

    Buying a used boat with Mercruiser 228

    It almost certainly doesn't They're all water cooled. Some have auto style closed systems running antifreeze, most don't. Echo the others, transom/stringers are most important. Drilling a core sample is the only reliable way to test the wooden components. Hammering, tapping, etc are fairly...
  15. nola mike

    . . . and I Thought Hi-tech Boat Engines Were Bad . . .

    Thought he was talking to me. How/why did you need to register? Mine was still recognized as having been changed in 2020 and listed the same parameters.
  16. nola mike

    Thought my boat would be faster

    Growing up had an '82 Galaxy 16' with a 120 OMC, it would hit mid-upper 30's
  17. nola mike

    . . . and I Thought Hi-tech Boat Engines Were Bad . . .

    It still recognized the battery correctly.
  18. nola mike

    . . . and I Thought Hi-tech Boat Engines Were Bad . . .

    Ok, ready for this? Getting waste gate codes. Had BT scanner plugged in, apparently still powered with ignition off. Killed battery 100 miles from home (another story about getting a charger). Charged battery. Noticed on the way back (after every warning light tripped) that A/C doesn't work. Now...
  19. nola mike

    Melted coil feed wire = Bad Pertronix?

    It will show voltage but won't get hot because there isn't current through the wire. Reconnect it to the coil, disconnect neg wires and try again. If still good connect negatives one at a time.
  20. nola mike

    180rpm

    Sure it does... Just put some debris or water in there 😀 Did you check the contents of your old filter? New gas +bad gas =more bad gas. All the water/crud hangs out at the bottom of your tank. Would check all that Ted mentioned, but usually it's bad gas/carb until proven otherwise. Can try...
Top