Search results

  1. harringtondav

    cooking

    Home made hot sauce. I've been growing, canning and drying hot peppers for over 20 yrs. Consumption has fallen behind production. So using them up as hot sauce is a solution. Pour off and save the brine. Macerate the seeds and skins out with a ricer. Add back enough brine so it pours. Then you...
  2. harringtondav

    Transom Water Pipe, should I replace?

    Maybe. See the pic. This may not represent your set up. Once the clamp plate is removed a new seal should slip over the water tube. But you can't help but wonder why this wasn't done rather than the white goo under the clamp plate. Plus your tube is looking old and beat up. So it's worth a try...
  3. harringtondav

    Transom Water Pipe, should I replace?

    Per achris more info on your model outdrive will improve the accuracy of forum responses. If you don't know, a pic will help. Pics of both the out drive and the gimbal assembly. The outdrive is bolted to the bell housing from the rear. Your bellows are attached to the bell housing from it's...
  4. harringtondav

    ....Think I'd have learned by now.

    Einstein supposedly said "I“the definition of insanity is doing the same thing over and over and expecting different results”. Questions about if he really said this, but it's also a good definition for stupidity. At least every two years I smoke my snowblower's auger drive belt. And I change...
  5. harringtondav

    Fresh water flushing of Mercrusier with alpha one drive

    See the attachment below, which I posted earlier. The Merc process is to measure pump output at 1000 rpm. The volume varies with the particular gear ratio of the out drive.
  6. harringtondav

    Fresh water flushing of Mercrusier with alpha one drive

    I'm assuming you have a raw water cooled engine, not a heat exchanger. I've never done this, so this is my best guess. Disconnect the raw water hose from the thermo hsg and use a splice barb to extend a section of hose overboard. Then clamp a short section of hose onto the thermo hsg and clamp...
  7. harringtondav

    Need some general direction - for my neighbors kid

    Sorry about the lack of s/n etc. I'm flying blind here. My neighbor's son bought a money pit Mid '80's Bayliner cuddy 18-19' 3.0L OMC drive. He has a serious oil leak which I'm pretty sure is the oil seal in the front cover. I agreed to show him how to replace it - meaning I'd do it later this...
  8. harringtondav

    Tires

    Watch your fender clearance. Those larger tires will get closer, and may contact with spring jounce. Also your brakes will be less effective. Also as mentioned above, if the trailer is close to limit, or has been overloaded before, (severe bouncing, etc) the axle camber may be slightly...
  9. harringtondav

    And this is why we do our maintenance.

    I had that puddle of lube in my new DS bellows, after a seal job last spring. And my suspicions are verified. "Assemble the oil seal into the oil seal carrier by pressing it with the lip of the seal facing away from the stepped side of the carrier" does not mean the pic below. If they would...
  10. harringtondav

    Keep track of your shims...

    ...and write down your last shim pack measurements. I pulled my drive shaft assy this afternoon in pursuit of a puddle of lube in my DS bellows...after a new seal last spring. The out drive was in the garage, so I dropped the DS into a plastic bag to keep the lube from dripping on the wife's...
  11. harringtondav

    Not a bad way to go...

    I'm guessing the guy is confused with the Australian Cattle Dog, aka Blue Heeler. Dingo descendant.
  12. harringtondav

    Busted motor mount bolts

    That's a tough one. It happened to my pal. He used Mad Props method. His broke off flush. He chiseled and beavered enough wood away to get a narrow jaw vise grip on the stub and worked it out. Then his oscillating tool to remove the rest of the wood plug. Then he expoxyed in a section of oak...
  13. harringtondav

    Alpha 1 Gen 2 Lower Seals

    The top bar is an 'H' bar from a universal puller kit with its lead screw. Its jaws weren't long enough, so I made up the lower 'H' bar adapter to accept my slide hammer jaws. The screws are to provide reach. SHCS or long carriage bolts work. A heat gun/paint stripper may be needed to soften...
  14. harringtondav

    Bellows Install

    I forgot one special tool you'll need to remove the bell housing if you're planning on replacing the shift cable bellows, which I recommend. It can cause more leaks than the drive shaft bellows. $15 if you shop for it. It's a perfect 12 point match for hinge pin removal. I've read that a square...
  15. harringtondav

    And this is why we do our maintenance.

    Last week was March-like warm, so I finally built my outdrive cart/stand. I had to back the trailer tires on a pair of 2 xs to get the boat 3" up so drive would clear the garage floor. My sore old back thanks to all who showed me examples of their carts. Good news is alignment is good. Bad...
  16. harringtondav

    Bellows Install

    The bellows expander tool can be found for <$30. The only other special tool needed is the drive shaft bellows retaining ring driver. $25. $55 is a bargain vs. the shop charges. You'll have to remove the upper shift shaft to use the expander tool. This may take a little heat to remove the screw.
  17. harringtondav

    Not a bad way to go...

    Australian Shepard. Misnomer since he's an American breed. Developed by Basque shepherds who migrated from Australia to California sheep ranches in the late 1800 - early 1900s. Great herders, wonderful loyal, smart pets, as long as you can keep up with their energy. He's one of several Collie...
  18. harringtondav

    Not a bad way to go...

    This showed up on my FB feed. I think I could do this, as long as I knew someone would take on my faithful Aussie Zeke at the end. https://www.nola.com/news/2019/01/af...HiU8KM5YtWSPis
  19. harringtondav

    What is your winter weather like?

    2018 was the record for precip. in east central IA. I need a max. 12' river gage level (Normal + 3') to put my rail boat lift back in the Miss. This was year 4 of 7 that I had to wait 'til Jul to get it in. Late Jul this year. Hardly worth the effort since it comes out mid-late Sept. I'm...
  20. harringtondav

    Vaping vs. smoking

    If you're a smoker this may interest you. My 29 yr old son has smoked cigarettes for 10 yrs. Wife and I wish he would quit, but since I burn 3-4 robusto stogies/day (Bill Clinton style: Don't inhale) I have to choose my words carefully. Last Summer the heads of AMA, FDA, American Cancer...
Top