Search results

  1. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Got a chance to throw some glass in.
  2. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Aaah yes you will. Yup a tank it is going to be. So Today went in and pulled out the screws. Then filled w/Pb. Saw some of the filets were a little less than what I want so I refilled them to spec. Not much more to say. Oh yea... the better hals told me to clean up around the boat. I concur.
  3. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    I think naked is a GREAT word Mikeopsycho . So I installed the other to new bulkheads to enable me to place the new/old tank. I also used any left over PB to seal anything I dink might be an issue. Sealed the wood prior...all edges etc. Now it's time to get the grill going after my shower...
  4. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Used a nice sharp blade to cut off the overhang to some degree. Will use the multi-tool to finish it flush. On a SPOOKY note....sat the tank in the coffin for a looksy... Oh meoh my... Getten close says I!:joyous:
  5. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Over the last few days baring rain outs I've been prepping and installing all the little bulheads and then prepping for glass. Good day, trying to beat the late afternoon storm so I gots a goods jump on it; Keep on Boating!
  6. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Nutter pic.
  7. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Ahh bummer on the no fresh crabs in da pot says I! So fitted and pb'ed the leetle bulkheads and stiffeners. Kinda done for the day cause I have some family coming over for a bbq.
  8. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Ya... So cut out and fitted the last of my bulkheads. Filled cavities, let set up, sanded, then acetone. After that I finished more or less the last tabbing, wet on wet 69 x 6 then 69 x 9. For the bulkheads I @ 8 that needed sealed and edges sealed. So what I do is drive screws into the work...
  9. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    hey guys, Just a question. What do you think about this deck pattern install? Is it acceptable as it is?
  10. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Nothing of note..just some more tabbing;
  11. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Just a little more
  12. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Try again;
  13. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    So some goodies arrived. So I did some "If 6 were 9" I rolled out the shiny new glass cause I have alot of tabbing to do. Rolled out 6" and then 9". Cut out to prep for install tom. or tonight. See how the day rolls. But it's happening this weekend. Also got my rubber for the gas tank install...
  14. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    No Biggy, I haven't had 2 days off in a row for like 8 mos.except holidays....wah, wah wah... So I made the most of it. After trimming down the LAST stringer I wet out the bottom, front and back. Made a nice PB mixture. Planned for the stringer set onto the hull. Once this part starts theres no...
  15. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    And between food shopping, lawnwork etc. I wanted to show how the stringer shows up when finished. There are different ways to remove the overhang glass. Some use a razor knife just prior to really being set up. And I use the grinder with a metal cutting wheel to make my cuts when working on the...
  16. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    So I decided to use the bulk of big and small scraps to cover the other side of the stringer doing wet on wet. First layer consisted of 6 pcs. second layer consisted of 3 pcs. All in all quite happy. So when pc. glass together always overlap by at least 3" to get the correct bond. When you wet...
  17. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    Well got a lettle busy today. Did some flat glassing on my last stringer on at least 1 side. had to do some prep like sand it, fill voids sand it then assetone it. Ran wet on wet....love doing glass on the flat especially yup ..you know it....EEEEEEEEEEEEpppppooooxxxyy! Then work on 1 of my fish...
  18. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    See @Mikeopsycho...right now I'm looking at my posted pics. Any Mods know whats going on? I saw them for a day and a half then go to the weirds zone now I see them. I also made a complaint and comment last night went back pics were up and the comment and new pics were gone. Someone is playing...
  19. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    So some more p ics...Now that I'm using my camera at a lower kb. Pics want to simply duplicate for no reason. Plus photo bucket is now history. So then I wipred down all the stringer tops and filled the voids. Letting that dry out, will sand and then roll out/coat with EEEEEPPPPOOOOXXXY!
  20. kcassells

    Rehab SportCraft 222 1983 deep V hull cuddy walkaround

    I haven't been able to order supplies yet but there is always something to do ya know. So after I pressured wash the boat out yesterday and let dry out I decided to cut my stringers and bulkheads down to new deck level. Was kinda fun...I am by no-means a carpenter and a sawzall is my tool of...
Top