Search results

  1. alldodge

    Rub Rail Restoration??

    I'm sure they make 50 foot but it would go to manufactures that need a lot of it. No way to ship just one piece. Look for boat or other kinds of manufactures that would use aluminum/stainless extrusions in your area. Might be able to buy one from them, but then the problem would be how to get...
  2. alldodge

    Engines: 2 x 4.3GXi or 1 x 5.7Gxi

    IMO the single 5.7 will not preform very well, get the twin. If offered I would get twin 5.7's. The single 5.7 will be giving everything it has to keep it going. The twins will be running easier My single 10K lb with 7.4 boat had a hard time getting on plane with just 2 people. Formula only...
  3. alldodge

    Installing a new asphalt driveway

    Install cost, having it done Asphalt - 2 to 4 sq ft Concrete - 4 to 6 sq ft Maintenance Asphalt - needs to be resealed every few years Concrete - not required 125 yd = 80 sq ft or 1.65 sq ft to do by your self.
  4. alldodge

    Correct bottom gasket for impeller kit?

    Steel, that is weird
  5. alldodge

    Correct bottom gasket for impeller kit?

    The gaskets use one on top the metal plate and one on the bottom. See item 23 and 24. Note: give little attention to what the gasket looks like in the pic https://www.mercruiserparts.com/bam/subassembly/30860/1942/130
  6. alldodge

    Charging voltage drop with diode isolator

    I would tap direct off house bats to feed accessories. This will allow you to leave the single switch always on the start bat unless need both to start motor.
  7. alldodge

    Charging voltage drop with diode isolator

    Need better understanding where the wires go, and the relay box. I'm starting to think that the boat had some kind of relay which charged both banks once the motor started. This might have been replaced with the isolator Is the orange wire in pic tapped off and does it go to relay box? Where...
  8. alldodge

    Charging voltage drop with diode isolator

    Agree, 12.7 my bad "only"
  9. alldodge

    Charging voltage drop with diode isolator

    Agree, the isolator is a set of diodes. Each diode has a voltage drop of 0.7V A fully changed battery should read 13.7V after being removed from charge and having sat for couple hours Alternator and battery chargers would normally output around 14.5V Alternator output is controlled by the...
  10. alldodge

    Installing a new asphalt driveway

    ^^Agree, but if you have help and pour it yourself concrete is cheaper. I poured my own with friends. Supplied stakes and beer Don't understand why when I mention concrete anymore all I hear is crickets :unsure:
  11. alldodge

    Correct carb?

    Will add, I listed max CFM above because that is listed as "race", meaning high flow heads/intake/cam. For the normal 350 it list 440 CFM
  12. alldodge

    Mercruiser in-line 6 165hp water reversal kit

    Suggest the gates catalog. Start with the ID and then determine length. This will put you in the area to look at the pics to see if it will work https://assets.gates.com/content/dam/gates/home/resources/resource-library/catalogs/gates-molded-coolant-hose-id-guide_web.pdf
  13. alldodge

    How many hours on Volvo Penta 4.3GXi-jf

    ^^Agree
  14. alldodge

    Instrument Replacement

    Correct
  15. alldodge

    Instrument Replacement

    North American style go from empty of 240 Ohms to 33 Ohms when full European style go from empty of 0 Ohms to 180 Ohms when full. I would look for the North American
  16. alldodge

    Correct carb?

    The 1409 CFM is 600, the 1410 CFM is 750 At 5000 rpm the 5.7 (350) will draw a max of 557 CFM. Boring out .030 to 355 max goes to 566 CFM Your good with the 1409, but may need to rejet
  17. alldodge

    Replace or Repair, where to start?

    Back flushing just means, remove the hoses and use a garden hose to flush them out back toward the drive one at a time. Your just looking for pieces of the impeller. Could be most all are gone, just checking
  18. alldodge

    Generac Generator 17kw Guardian Series- runs constantly

    Most likely a blown fuse. If fuse is blown the the Gen things power is out https://www.fixya.com/support/t25497274-generac_generator_turn_off_in_automatic
  19. alldodge

    3.7l 190 4bbl carb question.

    Have not tuned one on a 4 cyl, but a carb is a carb. Q-jet tuning will be the same
  20. alldodge

    1995 4.3 engine stops when starter key released

    Kill Switch?
Top