Search results

  1. alldodge

    Bennett Trim Repair And Auto Pro Install

    This is getting more involved but could do it now while I have the one trim ram off. To change appears to need the trim sensor kit and the Auto Trim Pro. Auto trim To do this its about $400 add on
  2. alldodge

    Assuption: RV Antifreeze clogs watercraft

    Suggest you need to read the owners manual a tad bit better, OR maybe you happen to have owned SEVERAL which are different then others This is from the 2007 manual
  3. alldodge

    Assuption: RV Antifreeze clogs watercraft

    The pink stuff you pick up every where, the -50 stuff. What we believe happened is the stuff which was used had more alcohol then normal and it reacted with the aluminum manifold.
  4. alldodge

    Which Adhesive Sealant

    Trying to decide which sealant to use for below water line trim tab reinstall. Has a 1/2 hole going thru the transom which will have the feed tube to the pump. Removed the old and the sealant was still pliable. Held to the hull and tab hinge very well but felt like and looked like white rubber...
  5. alldodge

    oil filter wrench suggestions?

    Strap wrench takes care of most of mine But love this type when removing the oil filter on the truck and some others. Attach a 12 inch extension and a ratchet wrench and it will reach way up under the truck and grab it. Expands from around 2.5 to 5 inch
  6. alldodge

    Bennett Trim Repair And Auto Pro Install

    Ya know if I would have read the instructions it would have been a bit easier and less messy, but what's the fun it that :D . There is a small piece of PVC pipe that comes with it and says to install on the shaft before removing the top cap. That piece keeps the shaft extended. With the...
  7. alldodge

    VP 5.7 GS PWTR Power steering fluid leak issue

    The valve has nothing to do with the return line. The return line should be next to no pressure in it in the line. Now if the line that comes off the high pressure valve side into the cooler then this is not correct, way to much pressure. It should be connected as such If the valve that...
  8. alldodge

    Bennett Trim Repair And Auto Pro Install

    Removed the cylinder today. Removed hydraulic line inside, then the 3 screws holding the hinge (Don't know why its called a hinge, it doesn't move). SInce it was cracked I just snapped it off the rest of the way. Had an impact driver but didn't need it Did some light hits all around with a...
  9. alldodge

    Assuption: RV Antifreeze clogs watercraft

    This is just an assumption, but right now we don't have any other answer. The PWC is winterized by pumping 4 gallons of RV stuff thru the motor. Used RV stuff and not straight antifreeze (exhaust manifold) because of the inner cooler. The PWC didn't get used any last year and sat on an Easyport...
  10. alldodge

    Installing kill switch on 1984 Mercury 150hp - Two kill wires coming from ingition

    You need to ground the Blk/Yel wire when the kill switch is pulled. Note the kill switch on this control has one Black and one Blk/Yel wire. With lanyard attached there will be no connection between the two wires. The on below is from an Rude but connection will be the same
  11. alldodge

    2000 Merc 5.L Gear Lube Hose

    There were two styles of thru fittings to connect the lube bottle. The early style was brass and used a nut to secure. The later style used the E clip and a quick connect on the inside
  12. alldodge

    converting to merc raw water type pump FINAL REPORT AND PICS WITH INSTRUCTIONS

    Thought about longevity, might want to use a slightly shorter belt on the pump because it appears there is little if any room left to tighten
  13. alldodge

    2000 Merc 5.L Gear Lube Hose

    Load pics this way direct
  14. alldodge

    Did I mention I hate log homes

    Here is what we have been doing
  15. alldodge

    oil level increase 5.7 GSI

    My guess would either be the injector or fuel pressure regulator. Need to get a pressure gauge on the throttle body to determine. Need one of these to connect
  16. alldodge

    Did I mention I hate log homes

    Yours looks real nice, look like the smaller logs. Buddy house has logs which are about a foot wide. The guy that gave him the 20K price was going to use corn cob to blast or something like that. Will say, I like looking at them, just would never own one. Have a wood sided house just bought...
  17. alldodge

    Did I mention I hate log homes

    Buddy of mine has a log home and is trying to get it back so it can be stained every 2 to 3 years. So we have been stripping and sanding for weeks. Doing all this IMO is crap. He never wanted a log home but wound up with one because the wife wanted it. Did I mention I hate log homes So...
  18. alldodge

    Centurion Enzo 2007 Mercruiser 6.2L black scorpion ski engine fuel blockage

    I would say your kill switch has been bypassed. The kill switch disconnects 12V to the motor (ECM and or coil). In pic below this is showing how to by pass, but the purple wire comes from the key switch to the kill switch then back to the gauges (purple wire)
  19. alldodge

    Winter water level drop

    Hear folks mention about how low their water level is dropped in the winter. The ones which get my attention are the 12 to 18 inch drop. In my area Cumberland drops around 20 feet and Dale Hollow drops 10 feet. These are averages because they have dropped more when water is needed for...
  20. alldodge

    Help! I broke my wall!

    These work
Top