Search results

  1. Dukedog

    Yet another V6 Merc question: voltage regulator?

    with a "good battery program" and if you run any type electrics at all, even if you use tha tilt n trim while ya runnin', no regulator will be fine... never ran one on any of my 16 amp stuff both production and high performance motors for a lotta years... jus make sure ta keep healthy...
  2. Dukedog

    XR2 Spark plug question

    "float test the idle stabilizer".... ya might consider tha oiler too if that hasn't already been deleted.... if you know tha history of tha motor and its care (never been over heated main item) and tha oiler is workin' ok at this time) then ya might wanna leave it alone,, your choice.... bu8h...
  3. Dukedog

    XR2 Spark plug question

    not much difference between them.. tha hw is more for something thats gonna be "turned up" more so than a stock motor but will be fine for tha normal stuff to..
  4. Dukedog

    Tilt and Trim 150hp Mercury v6

    speed makes no difference at all..............
  5. Dukedog

    Swapping stators from 1991 150 over to a 1987, 200

    unless you "index" tha flywheel so to check each cylinder i think you should run it at around 22* crankin'.. reason is you don't know what each cylinder is without doin' it.. its possible for any other cylinder other than #1 to be a coupla degrees more... you will never notice tha difference...
  6. Dukedog

    86-87 Mariner 150 questions

    if you poppet has a two bolt cover tha its gonna be part #65663A2 if it has a four bolt cover its ganna be part #14462 turbo explains alot!.. not one of tha favorites.. pressure should be 3 ta 7 at idle and 12 ta 18 at wfo..... when ya changed tha pump did you replace it all or jus tha...
  7. Dukedog

    86-87 Mariner 150 questions

    thats a lotta prop for a little 2 liter!!!.. what 4 blade was it?.. do you have a water pressure gauge?
  8. Dukedog

    Timing, Ground plug boots

    yep....
  9. Dukedog

    Timing, Ground plug boots

    yes and yes... big clamp anywhere on tha block or at tha battery ground at tha starter....
  10. Dukedog

    Swapping stators from 1991 150 over to a 1987, 200

    JAN.. you will need to "modify" tha top cap a tad to mount tha bigger stator.. you will see what needs ta be done when to try ta mount it......
  11. Dukedog

    Can I use a 3 wire PTT motor to replace a 2 wire PTT motor and keep the relays?

    think your probably tha first i've heard of that wants to go "backwards" with that type system!!! never thought of that type conversion... jus curious if it will work too........ gl.
  12. Dukedog

    Tilt and Trim 150hp Mercury v6

    ya ask and answered your question in this first post.......... jus replace tha word o-ring with rebuild kits..... only cure for tha tnt system when they start "bleeding off"...
  13. Dukedog

    Need help identifying old Merc carb

    lotta those around.. pics would help....
  14. Dukedog

    Need help identifying old Merc carb

    probably a 135/150/175 2.0 motor.. possible 175 2.4.... do you have tha complete power head?.. if you do there is a "build date stamped on tha port side, at tha base of number 2 on tha block half.. may be hard ta see but its there... m/d/yr.... also may have a serial number stamped in tha welsh...
  15. Dukedog

    Tilt and Trim 150hp Mercury v6

    (y)
  16. Dukedog

    Need help identifying old Merc carb

    box square with what looks like plastic "organ" pipes on each side or is it rectangle with a few small round openings on each side?
  17. Dukedog

    Tilt and Trim 150hp Mercury v6

    if i'm readin' this right it indicates it has a leaky seal between tha motor and tha pump......
  18. Dukedog

    Need help identifying old Merc carb

    any WH series kit will work.... 'bout only difference is venturi size and jetting... do you have tha air box?.. it can help narrow down what motor they came from....
  19. Dukedog

    Need help identifying old Merc carb

    they usually have a "stamped" number following tha WH which would narrow it down.. if not, like you say, it may need ta be identified by tha jetting.. do you have just tha one carburetor?
  20. Dukedog

    CHARGING QUESTION

    if ya haven't found it yet it has a regulator (pt. # 815279 A2) on it.. would need ta test it out.....
View older results
Top