Search results

  1. dingbat

    Power trim fluid / refill

    Hydraulic and ATF oils are basically one and the same. The difference is in the formulation of the additive packages and the dye used to color the product. While any good quality hydraulic/ATF oil will work as long as a specific formulation is specified. I use IH Hy-tran hydraulic oil mine...
  2. dingbat

    Fuel Gauge Stopped Working on my Boat

    If you melted the gauge and the switch, there is a good chance are you damaged the sending unit in the process.
  3. dingbat

    Whats the deal with "High Milage" conventional and synthetic motor oils???/

    https://www.machinerylubrication.com/Read/31414/high-mileage-oil
  4. dingbat

    Bought my first boat to cut, gut and rebuild from bow to stern, including engine. Killed my back and suffered the wrath of the fiberglass demons

    Understand…just making the point that ABYC wire colors are only recommendations as well. They are not cast in stone nor should be treated as such. #1 rule in electronics….don't assume anything Had a guy smoke a $20k circuit board last week because he believed the drawing over what he saw with...
  5. dingbat

    Boat Seat Replacement

    Looks like a converted cooler. Cooler cushions are popular and reasonably priced. Goggle….boat cooler seat replacement
  6. dingbat

    2020 Mercury 150 4 Stk/Steering Feels Stiff. Where Are the Grease Point Located?

    Looks like a steering cable nut....
  7. dingbat

    Did the factory connect my fuel system wrong, please help!

    The only problem I see is that they used hose clamps instead of the loop type clamps in the diagram. Personally, I would use Oetiker clamps Guessing the “damper” (plug) is only used to keep fluids from leaking during shipment
  8. dingbat

    Props for Yamaha F100 and 17 Boston Whaler

    Go stainless for the bling……37 mph in a Montauk is fast enough
  9. dingbat

    2020 Mercury 150 4 Stk/Steering Feels Stiff. Where Are the Grease Point Located?

    Nope, that's it. If pumping new grease in doesn't clear the old grease and restore operation, you need to tear it down to clean *** out. FWIW.... picture appears to still have cable steering connected
  10. dingbat

    Bought my first boat to cut, gut and rebuild from bow to stern, including engine. Killed my back and suffered the wrath of the fiberglass demons

    Don't disagree, but the ABYC "Standard" are recommendations at best. Builders are free to utilize their own color scheme if they choose to do so. Just making the point to never assume, always confirm. Industry standard color codes are at most suggestions... Case in Point....
  11. dingbat

    Bought my first boat to cut, gut and rebuild from bow to stern, including engine. Killed my back and suffered the wrath of the fiberglass demons

    Have found several units over the years (mine included) where pink is ground and black goes to sending unit https://kus-usa.com/wp-content/uploads/2020/02/KUS-USA_SendingUnit_Installation_v4.pdf PROPER WIRING INSTALLATION: - Connect ground (pink) wire from the KUS sending unit to a common...
  12. dingbat

    Substitute for 317002

    You might want to look at the screw drivers made specifically for DIN Rail terminal blocks. Hardened chrome steel tips. Available in tip widths ranging from 2.0 to 6.5 mm in 0.5mm increments I "borrowed" one from work many moons ago and it has yet to fail me. Have yet to run into an...
  13. dingbat

    Houston….. We’ve had a problem…..

    Grew up in what was then the middle of no-where. Could go for miles via fields, old farm paths, etc. w/o getting on a public road. Used to hot wire and go for rides while the parent where away when I was 14. They gave me the car when I turned 16. The start of your typical “broke kid” trying...
  14. dingbat

    2000 Yamaha F100 four stroke oil alarm goes off at first and then goes away

    Always start with the simplest possible problem and go from there, i.e. check for a clogged fuel filter before rebuilding the carbs
  15. dingbat

    Houston….. We’ve had a problem…..

    Still have mine as well My first Bug was the one my parents bought new in 1963. Sold my last “bug” in 1986 Owned a 67 bus, 72 convertible bug, 65 Karmon Ghia convertible and a 74 bug. Cheap to “hot rod”. Forgot what a set of oversized “jugs” cost but it wasn’t that much. Always had a “spare”...
  16. dingbat

    Solas Amita vs OEM (Yamaha)?

    I would agree…..Sales Manager for the OEM Supplier market for a number of years. OEM suppliers want something that meets their (typically min.) performance specification, gets them through warranty w/o hassles and expect volume pricing to go with it. We configured an entire product line to...
  17. dingbat

    Replacing Keel rollers

    Might want to contact them to see if they have a chart specific to your model year https://www.seafoxboats.com/wp-content/uploads/2020/10/TRAILER-SPECS-MY2020.pdf
  18. dingbat

    Replacing Keel rollers

    Then the question becomes....does the bunk make full contact with both sides of the hull in that location? FWIW: Grady wants the stringers sitting on the bunks. I would image most other boat builders do as well. Where are your stringers in relation to the bunks?
  19. dingbat

    Time for a new battery charger

    Wet - sealed unit, can be mounted in the "wet" location Vented - unit is open to environment, must be mounted in a "dry" location Both are capable of charging a battery under load. The difference being that the vented unit has a higher charging capacity based solely in it's ability to...
  20. dingbat

    Replacing Keel rollers

    My bunks are 4" x 6". They don't bow between the heads and ends of the bunks. I would run a straight edge cross the brackets width wise in all three locations and measure the distance from the bunk to the frame to compare. Could be a frame has bowed in the center over time.
Top