Search results

  1. D

    1990 Bayliner 2651 resto

    Worked my way through the intake manifold. It was a mess on the block. Removed Risers and exhaust( cleaned with muratic acid) and painted.
  2. D

    1990 Bayliner 2651 resto

    Next up was the inside of the engine bay. Started at the top of the engine and worked my way down. First was to rebuilt quadrajet carb. It was a mess. But learned a lot from people on the forum.
  3. D

    1990 Bayliner 2651 resto

    The most useful part of this rebuild.
  4. D

    1990 Bayliner 2651 resto

    Being new to I/O I figured I would start with the outdrive and start pulling things apart… As parts came off the boat. I assessed each part. Replaced seals, bearing carrier, rebuilt trim cylinders and repainted parts of the outdrive. Unfortunately didn’t take many before pics but have taken the...
  5. D

    1990 Bayliner 2651 resto

    The day I brought it home was a bit scary. Didn’t have far to tow but this was waaaaay different than towing a little bow rider. Nonetheless we made it
  6. D

    1990 Bayliner 2651 resto

    To begin I’d like to thank everyone on this site. Reading and learning about what NOT to do 😂has helped me greatly. The knowledgeable folks on here is amazing. This post is a bit backwards since I’m trying to recreate the last 5-6 years and sharing my project. Which is still in progress! I...
  7. D

    Replacement long block

    Gotcha… thank you both! I’ll be getting a new marine long block. The old block is nothing more than a heavy anchor. I did remove the alternator as… and all mounting brackets.
  8. D

    Replacement long block

    Hoping to get some information regarding what else I need to take off ( and reuse) from the old 5.0 and transfer to the new( reman) long block. Here’s the list of what Ive currently done. removed, inspected, cleaned, painted and rebuilt: carb intake manifold distributor risers power steering...
  9. D

    Cleaning aluminum gas tank

    Love this forum. Great information from knowledgeable boaters. Looking for advise on the best way to clean the inside of an aluminum gas tank. I’ll be removing the tank from a 1990 Bayliner 2652. Once removed I’ll pressure test and if it passes I’d like to clean the inside. What’s the best way...
  10. D

    1985 Bayliner 2750 Ciera Sunbridge Resto

    I’m following along. Looks like you have your work cut out for you. I’ve got a1990 2652 that is in year 4 of resto. Told the admiral it would be 3 years😂Covid slowed the process greatly. Seems like every step was another oh boy gotta fix this. I love the layout of the boat. Good luck.
  11. D

    Hydrofoil/Whale Tail Good or Bad

    I’ve got one… 1993 16ft bayliner classic with a force 70 hanging on the back… made a big difference in getting up on plane. Didn’t impact overall top speed.
  12. D

    Bearing preload

    Is it necessary to use a new nut when doing the preload or can the old nut be used when replacing the seals?
  13. D

    Pressure test 1990 Alph1 Gen1

    Thanks both! I figured soapy water was in order.. no sign of leaking before seals were done. I figured with the age and not knowing what had been serviced I figured I’d do them. Boat sat for 2 years before i purchased. As I removed things off the boat I rebuilt everthing… EXCEPT THE SEAL...
  14. D

    Pressure test 1990 Alph1 Gen1

    Hello All, I recently replaced seals on my outdrive. Did both upper and lower. Shift shaft seal, replaced impeller with all new seals and replaced bearing carrier. I replaced everything but the universal joint seal on the top half since it is a bit tricky to get the preload correct. Did a...
  15. D

    350 Mag / Alpha One / Gen One Gimbal ring bearing seals

    Here’s the cover of the service manual followed by the pages describing the seals…. Early model alpha and later models.Hope this helps. Happy new year!
  16. D

    350 Mag / Alpha One / Gen One Gimbal ring bearing seals

    I believe you need the #6 mercruiser manual For aphla 1 gen 1. Found mine used on eBay for $25.00
  17. D

    Steering Wheel Removal & Repair

    I used a flywheel puller to get mine off… a lil tapping as I put pressure on the hub… it popped pretty good once released … be careful..there’s probably a key way on the hub as well… keep track of where it may fly… perhaps wrap a rag around it..
  18. D

    Boating YouTube channels

    If watched many Danger marine… seems knowledgeable.
  19. D

    Bayliner Capri hull structure

    Got any pics. That would help us greatly.
  20. D

    Bearing carrier stuck

    Excellent news…. What made it happen. Curious
Top