Search results

  1. C

    OX 66 Trim & Tilt

    Replace with a good fresh water used unit. Charlie
  2. C

    Cotter pin for Prop...Any one will do??

    is it Kotter pin??
  3. C

    Cotter pin for Prop...Any one will do??

    Gonna need a new cotter pin for my Yamaha outboard. I have a Tractor supply store right down the block. A matching size cotter pin should work..?? Btw,I dropped my pin somewhere and figured I would find it with a magnet...NOPE ,it's not magnetic .Usually means it is stainless..?? Charlie
  4. C

    Pink Super Tech (Walmart) -50 RV and Marine ok for engine?? I always thought NO...??

    I have recently seen videos of dudes winterizing Mercruiser engines using what I have ONLY used on my water systems.Pink -50 Super Tech Marine and RV antifreeze. I thought I remembered this being a BIG no on engines. Dont remember exactly why.Charlie
  5. C

    Does Yamaha flush port/hose, flush 100% of motor?

    Flushing port def gets to the impeller....thats not my concern since Im doing the impeller every other season anyway.does it get to the entire upper???? thats my concern???? I think not unless motor is warmed up and stats open.Charlie
  6. C

    Gas Pressure washer "turn off" instructions incorrect??

    Though I bet if I lay the machine on its side and spray the fogging oil I already have in the inlet and outlet, will probably accomplish the same.Charlie
  7. C

    Gas Pressure washer "turn off" instructions incorrect??

    Yep,thats why I store it indoors.Just saw an aerosol can of oil that blows thru the water inlet to coat the internals....not a bad idea for $10..??
  8. C

    Gas Pressure washer "turn off" instructions incorrect??

    I bought a Westinghouse pressure washer.Pretty happy with it so far though a little more power would be nice.Bought the larger engine model 212 cid. The instructions for turning off seem to be in the wrong order.Manual states step 1 turn off power switch, step 2 turn off fuel, step 3 turn off...
  9. C

    Does Yamaha flush port/hose, flush 100% of motor?

    2000 200hp saltwater series ox66 2 stroke.I am one to ALWAYS put on muffs and let it run till fully flushed.what % of the motor gets flushed using the flush port only?? Charlie
  10. C

    Home breaker Box panel question .see pic

    Thanks for the explanation,much appreciated. Im pretty sure the 220 breakers are the large black ones up top but I will take a closer look. In the 30+ years I am in my home I rarely go in the breaker box and when I need to I shut the main. I fear electric, always have. I had to replace a simple...
  11. C

    Is this engine oil good?

    Yep,thats what I use.Wally world drops it off on my stoop .Cost is like $20.Shell,Mobil Delvac, Valvoline,Chevron or store brand Super Tech which you can get for $15. I much require a BIG name brand when it comes to oil.Charlie
  12. C

    Home breaker Box panel question .see pic

    Not entirely sure what you are asking ?? The breakers are for the bedrooms and garage outlets
  13. C

    Home breaker Box panel question .see pic

    Take a look at the green breakers.Im not familiar with breakers at all.They look like double breakers and there is a metal piece that works the 2 outside breakers together..?? I am asking because one of the breakers was acting like it was trying to trip and I think the metal clip was stopping...
  14. C

    Gonna need to pull my Alpha outdrive, no water flow.Thinking its clogged

    Yep plenty of fouling but I use several coats of trilux aerosol into the intake screens of the drive prior to launch. Usually no barnacles in there but who knows, it only takes a few big ones to make trouble.Im going with the mud theory for now till I pull the drive.Charlie
  15. C

    Gonna need to pull my Alpha outdrive, no water flow.Thinking its clogged

    Im transported home for the season.Twin 5.0 mercruisers with alpha one drives 1988. Serviced water pump on stbd drive preseason.Only put a few hours this season with no issues with cooling so I am sure water pump service went well. My slip is muddy at low tide and after idling with drives 3/4...
  16. C

    Aftermarket Mercruiser parts, What are you using???

    Trying to avoid cheap China parts.Need 2 Transom kits for Alpha drives.(bellows, intake hose, gimbal bearing etc) China kits average $50 per kit. Sierra average $200 per kit, Quicksilver oem closer to 3-$400 per kit. What are you guys using?? Not a job that I trust to myself since I have never...
  17. C

    Yamaha S200TXRU

    If you are wanting The fuel injected model ,which I highly recommend, you need to look at something a little newer.I have year 2000 and its injected.Charlie
  18. C

    Yamaha OX66, SX200TXRB Starting Problem

    The VST tank has an expensive filter inside of it.Did you replace or clean it??
  19. C

    options for boat cover supports

    As your pic shows, your cover either does not fit correctly or you do not have it strapped tight enough.Inflatable is a good idea .You can use a host of things as support .I have used plastic easy assemble saw horse.Charlie
  20. C

    Lower unit oil leak through weep hole after impeller replacement

    Quad O ring should be glued into place after carefully thoroughly cleaning where it is seated.This however does not sound like your issue however doing this procedure correctly will remove any doubt re; leaking from this area. In your case my guess is drive shaft seal in the upper.Charlie
Top