Search results

  1. matt167

    Connecting 1962 controls to 2004 motor

    Could it work... I 'think'. Since type 33C/3300 cables are what the 2004 Suzuki would use from the factory, and the OMC, can be adapted to use them... Yes mechanically it might work. As long as the control pushes or pulls the cables in the correct direction, or can be adapted to do so. As for...
  2. matt167

    Oil pan size

    fill it up with liquid to where a windadge tray would sit and see how many quarts that is. Thereabouts will be 'full'... If it has the dipstick tube in the pan, that is even easier. Keep in mind that a big block engine will use about 3 quarts of the oil pan capacity while running. So if you had...
  3. matt167

    Mercruiser 7.3 d-tronic diesel

    It's the same 7.3L that International Navistar built and Ford called the 7.3 Powerstroke. Mercruiser use was short lived, and so parts will be hard to find.. Yours is brand new but eventually you will need parts.
  4. matt167

    planning first trip to thousand islands

    Were fairly simple. a nice motel would do. It would probably allow an extra day of stay within the same budget
  5. matt167

    planning first trip to thousand islands

    When I looked for random dates in June, A bay hotel's hovered around $200 per night, but Clayton had hotels just as nice for $100 per night. a few mins drive is worth $100. We have places of interest in both Clayton and A Bay. I will probably launch and retrieve as I don't know if every...
  6. matt167

    planning first trip to thousand islands

    Hotel most likely. Probably in Clayton as the rates are much cheaper. I have not booked anything yet since I don't know exactly when yet
  7. matt167

    '67 Holiday 18' - Make it Usable

    The plywood you use better be exterior rated and at least Exposure 1. You can get away with CDX, but BCX or ACX will be a little nicer.. liquid transom solutions won't work on a tinny. not well at least.. I'd be looking at Coosa
  8. matt167

    Small Engine Forum Recommendations

    mytractorforum has a pretty good small engine section. However that probably needs a carb rebuild. For the cost of a rebuild you can get a decent aftermarket. Check Amazon for HM 100 carb
  9. matt167

    Small engine replacement. LoveJoy shaft connector. How does it remove?

    Predator is 3/4" shaft. I think the second is the diamater of the coupler itself. Tractor supply or other farm store carries them as well.
  10. matt167

    Star Craft Acrylic windshield replacement

    I found The Plastics Guy as well. He does not list prices though. I'll keep this updated
  11. matt167

    Star Craft Acrylic windshield replacement

    I did look and didn't find anywhere near me.. NYC appears to be the closest with any amount of fabrication ability
  12. matt167

    Star Craft Acrylic windshield replacement

    There is a supplier near here that carries both. I will get the polycarbonate... I said Acrylic not thinking, they are totally different
  13. matt167

    Star Craft Acrylic windshield replacement

    The windshield is about 60" wide,. Little more but I don't have the exact measurement, so it should fit on a 4x8 sheet of material.. I was thinking about taking the original out of the frame, and then using Coreplast to wrap around it from the outside to make a pattern and then trim it until it...
  14. matt167

    Star Craft Acrylic windshield replacement

    Does anyone think that this windshield can be bent out of lexan or other polycarbonate or acrylic panel? It's been cracked in 1/2 since I've owned it. The previous owners put some cheap clear caulk on it but I put some clear-er Lexel caulk sealant on it. Kind of masks it UDP shows a windshield...
  15. matt167

    89 Yamaha Sterndrive bellows and parts

    I couldn't remember which Ken knew about it the stern drives. That's why I didn't say a member name. But Bondo knew. When Yamaha stern drive issues come up, he is really the only source
  16. matt167

    89 Yamaha Sterndrive bellows and parts

    There is only one member here that has any knowledge of them and he can be quite busy.. Can't post links to other retailers but a place in NY claims to have the biggest inventory of Yamaha stern drive parts in the USA. A google search will find them. If you ever decide to swap out drives to a...
  17. matt167

    Are we in trouble?

    If the engine is a fresh rebuild, then it is better at zero hours.. If it's rebuilt but used, then it's used. It may just have records proving how used or un used it was.. the dealer should discount it accordingly if it is more used than the original which was freeze cracked
  18. matt167

    Small engine replacement. LoveJoy shaft connector. How does it remove?

    A 5hp Briggs should have a 3/4" shaft. That swap is about as easy as it could get. The base plate dimensions are the same. But the clone engine will require new bolts due to the thicker casting.
  19. matt167

    Bow Trolley on Trailer instead of Winch, stock

    It looks too well thought out to not be engineered/ manufactured Norcal trailers still appears to be in business but not manufacturing trailers anymore. Appears they sell Big Tex. I bet that was some in house manufactured deal. Plenty of trailer manufactures have came and went and at varying...
  20. matt167

    Bow Trolley on Trailer instead of Winch, stock

    I bet that trailer has to be deeper than you think to load without power. Hook a winch to pull the trolley and you have an ingenious self centering/ loading trailer. Does it hook the bow eye automatically somehow? I mean that's easy with a manually positioned caribiner or something like that...
Top