Search results

  1. JASinIL2006

    Sanger v210 Keel Hull damage

    Hard to tell from your pictures how long and how deep the scars are. In any case, it is repairable by anyone who is reasonably handy. I'm not sure if new fiberglass cloth is needed, but at a minimum, some thickened resin to fill the voids, followed with a coat or two of gelcoat on top. After...
  2. JASinIL2006

    Adding Distilled water to battery. what qualifies as distilled?

    This is the question. Distilled water at our local Walmart is $1.34USD per gallon. Unless you're really in a pinch, why introduce any unnecessary contaminants into an expensive battery?
  3. JASinIL2006

    What does this marking mean on this new to me outdrive?

    Anti-clockwise would be pretty uncommon terminology in North America... most here use 'counter-clockwise.'
  4. JASinIL2006

    Bought my first boat to cut, gut and rebuild from bow to stern, including engine. Killed my back and suffered the wrath of the fiberglass demons

    Demolition and grinding are really tiring. Once you get all the garbage cleaned out and all the bad stuff ground away, it starts to get a lot more fun.
  5. JASinIL2006

    2024 Super Bowl !!

    I agree. It makes me very uncomfortable to see so much sports gambling. There have been problems in the past with influencing the outcome of sporting events and and I can't believe the prominence of gambling these days won't eventually cause that to happen again.
  6. JASinIL2006

    Transom repair on Lakeland fiberglass.

    This would be fun out on the water...
  7. JASinIL2006

    Marine epoxy/fiberglass in toilet tank?

    Thanks, guys. My sister's out in Alexandria, VA, so I'm not sure what the local water (and scale build-up) is like. I'll pass along these ideas. Thanks again! Jim
  8. JASinIL2006

    Marine epoxy/fiberglass in toilet tank?

    Hi all, my sister has an older home that has a very cool art deco bathroom that has some unique fixtures that seem to no longer be available. (She's even checked restoration suppliers.) The toilet tank has a crack that runs about 8-12" and it sounds like some solution that seals the crack and...
  9. JASinIL2006

    To tip a housecleaning service?

    I would, especially if you want that level of service to continue. Finding someone who attends to that level of detail is uncommon.
  10. JASinIL2006

    Bought my first boat to cut, gut and rebuild from bow to stern, including engine. Killed my back and suffered the wrath of the fiberglass demons

    The oscillating multi-tool is VERY handy. A must-buy, in my book.
  11. JASinIL2006

    Bought my first boat to cut, gut and rebuild from bow to stern, including engine. Killed my back and suffered the wrath of the fiberglass demons

    I used both a 4.5" grinder and a full sized grinder. The full sized grinder was just too heavy for prolonged use, especially when contorting to reach all the corners of the transom. The 4.5" grinder with a 60 grit wheel did the trick. I went through two of them... I think at the time they were...
  12. JASinIL2006

    Bunk Boards or Guide Poles?

    The guidepoles are mostly helpful for locating the end of the trailer. If your boat gets blown into them, they will bend. If you're looking for something to help guide your boat onto the trailer in windy or swift current conditions, I'd go with side guides.
  13. JASinIL2006

    Bought my first boat to cut, gut and rebuild from bow to stern, including engine. Killed my back and suffered the wrath of the fiberglass demons

    I was able to wear them several times. After grinding fiberglass, I'd blow off the suit with an air gun while I was still suited up, and then I was able to reuse the suits several times. I usually would only break out a new one when I got a tear or I abraded a hole in the one I was wearing. The...
  14. JASinIL2006

    Can't remove 5.7 vertically.

    Whoever designed that engine bay should be flogged with spark plug wires.
  15. JASinIL2006

    Bought my first boat to cut, gut and rebuild from bow to stern, including engine. Killed my back and suffered the wrath of the fiberglass demons

    I found almost all my stuff on Amazon: Tyvek suits with hood (I found larger is better) - https://a.co/d/8lio1gP P100 respirator - https://a.co/d/9G3FlUm Goggles - https://a.co/d/64pxylm Also useful: Nitrile gloves (often worn under leather work gloves) Duct tape (I taped my sleeves to my...
  16. JASinIL2006

    Smart tabs.

    Smart Tabs cured porpoising and chine-walking on my boat. They also helped quite a bit with bow rise on holeshot and they allow me to stay on plane at speeds 3-5 mph slower. True trim rabs would doubtess give you more control and adjustability, but SmartTabs might help in your situation.
  17. JASinIL2006

    Bought my first boat to cut, gut and rebuild from bow to stern, including engine. Killed my back and suffered the wrath of the fiberglass demons

    Ski lockers are great for storing fenders, an oar, etc. Be a shame to lose it... as others have said, storage on a boat is precious space.
  18. JASinIL2006

    Would you?

    Biggest thing I'd be concerned about is a situation where you have to stop quickly (e.g., kid on a bike darting in front of you); that could be a problem. Otherwise, for that short of a trip you should be OK.
  19. JASinIL2006

    Smart tabs.

    Which performance aspects would you want to see improved? Holeshot? Minimum speed to stay on plane? Eliminate porpoising?
  20. JASinIL2006

    Fell for my first scam but fixed before anything happened

    Most of these folks are operating from other countries, so our laws are meaningless to them.
Top