Search results

  1. bruceb58

    Hydrolock, swim platform, riser height and static water line question

    That can't happen since water will just leak out the idle relief ports
  2. bruceb58

    Overheating after impeller change

    Awesome. Thanks for coming back and letting us know the results. This will help other people troubleshooting in the future.
  3. bruceb58

    NCAA March Madness Bracketology

    I think Baylor is going to win the finals
  4. bruceb58

    NCAA March Madness Bracketology

    Ucla had a great chance at end of regulation. Good game
  5. bruceb58

    Mechanical to Electronic Conversion

    Nope! I wouldn't even attempt.
  6. bruceb58

    Mechanical to Electronic Conversion

    Do a google search of upgrade Volvo Penta to EVC.
  7. bruceb58

    Riser To Manifold Torque w/Sierra gasket

    Out of curiosity, where did you find those torque specs? Sure doesn't say that in my Volvo service manual.
  8. bruceb58

    Riser To Manifold Torque w/Sierra gasket

    They look good. Confirm flatness with a straight edge. Always use a torque wrench Use the instructions with the gaskets I mailed you...went out today.
  9. bruceb58

    Pulling outdrive question????!!!

    Volvo Penta 75W-90
  10. bruceb58

    Glue vs clip VP SX exhaust bellows

    Are you replacing your gear oil too? Often, if enough water gets into the bellows, it will travel through the driveshaft seal.
  11. bruceb58

    Glue vs clip VP SX exhaust bellows

    sent You are lucky you only had so little water. You may have dodged a bullet.
  12. bruceb58

    Riser To Manifold Torque w/Sierra gasket

    12-18 ftlb I sent you some links to manuals. Older than your model but will help with most stuff like this
  13. bruceb58

    Pulling outdrive question????!!!

    There are no bellows on a Volvo(Cobra SX)on top of the tube. Just a little grommet/cap with a hole in it...if its even still there. It doesn't get replaced.
  14. bruceb58

    Pulling outdrive question????!!!

    For the u-joint bellows...transom side. I have no idea on the exhaust..never changed one
  15. bruceb58

    Pulling outdrive question????!!!

    No bellows
  16. bruceb58

    impeller

    http://www.volvopentastore.com/Boat-Parts-Accessories/dm/gclid.CjwKCAjw3pWDBhB3EiwAV1c5rGTuGEIT4UJMPrgzKkYhTf89ogprotQhzZoLI4A2TRZVJ7lIK4r0IBoCkvQQAvD_BwE?cm_mmc=Google_Main-_-Volvo%20Part%20Types:Google-_-Volvo%20Penta%20Parts:Volvo%20Part%20Types:Google-_-KW%20or%20Sitelink
  17. bruceb58

    Pulling outdrive question????!!!

    Volvo Penta Gear Lube http://ww2.iboats.com/75W-90-Transmission-Oil-Gallon/dm/cart_id.497501916--session_id.251135417--view_id.278348 Its getting harder and harder to find at a reasonable price. Good thing it only uses approx 2 qts.
  18. bruceb58

    Pulling outdrive question????!!!

    Bottom. Pull the vent screw behind the shifting mechanism. Once the oil gets to that level it is full. Then you put in dipstick, that vent screw and put in the fill/drain plug at the bottom. Then remove the dipstick and recheck level without screwing the stick in. Should be in the middle of the...
  19. bruceb58

    Pulling outdrive question????!!!

    I haven't owned it long enough to know. I do know I am going to love the electric shifting and throttle. No more cables between the helm and the engine. I believe Volvo also has that too now. And since it is going to be stored in a possible freezing area now(although inside) going to like the...
  20. bruceb58

    Pulling outdrive question????!!!

    I can't even remember the last time I used adhesive. I change my bellows every 5 years so I have done them a few times!
Top